swillslet 10 Posted January 21, 2012 Hi all! I started my 2.0 16v (l reg) today and noticed upon pulling away that it seemed to lack a lot of 'oomf' also was idling all over the place. I took a quick look at the engine bay and noticed that the engine was moving a lot more than i had previously seen. Kinda like it was vibrating. I know that it will move slightly but nowhere near this much, the dipstick was moving backward and forwards about an inch. I then turned the engine off then back on. Upon doing this it idled fine and the engine movement was gone. Im pretty stumped... Any help given will be greatly appreciated. Quote Share this post Link to post Share on other sites
dubnut 10 Posted January 21, 2012 Isv is first....clean out with carb cleaner. Engine mounts may need replacing metering head may need replacing Isv cleaner don't work There is a lot of posts about this do a search i had the same mine was metering head which i got from scrappy for a tenner Quote Share this post Link to post Share on other sites
