Jump to content
bigbaz

G lader rebuild help please

Recommended Posts

Hi just stripping my g lader to rebuild it when I went to remove the drive pulleys I noticed that the 2 alignment dots both face to the top of the charger I thought they should face each other can some one confirm the correct timing please before I put it back together thanks barry

Share this post


Link to post
Share on other sites

That's great cheers pal just stripped it good inside apart from some prick has put a bolt in that's to long where the outlet pipe goes on and has split the casing inside where the bearing fits

Share this post


Link to post
Share on other sites

that's where the oil was coming from down the thread of the bolt that holds the outlet on

[ATTACH=CONFIG]73790[/ATTACH]

done a repair with liquid metal been careful not to block the oil feed

[ATTACH=CONFIG]73791[/ATTACH]

[ATTACH=CONFIG]73792[/ATTACH]

ready to fit back up now

[ATTACH=CONFIG]73793[/ATTACH]

[ATTACH=CONFIG]73794[/ATTACH]

lucky the charger was in great shape apart from where some prick had fitted a bolt which was to long

just got to finish fitting the rebuild kit then some paint and back on the car

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...