Jon94VR 10 Posted July 28, 2013 (edited) Over the past two days or so, I've gone from oil temp and outside temp displayed on mfa to dashes on the oil temp setting and the outside temp setting disappearing completely (after the oil temp it goes back to the clock on mfa) Guessing oil temp is a sensor, but not sure about the other, is it a clock problem or just the sensors? Should mention that I don't even get an oil temp whilst driving, done a long run today involving motorway and still doesn't show oil temp Edited July 28, 2013 by Jon94VR Quote Share this post Link to post Share on other sites
jonnykillpop 10 Posted July 28, 2013 The oil temp will display dasshes until it's reached bout 70 degrees or so, the outside temp is a sensor down by the front grill, next to towing point, maybe gave up or just needs a clean, mine has'nt got sensor on, so does'nt display on mfa but can't say ever bothered me, presume it's just display and does'nt effect engine management, unless anyone knows differently, it's got plug just never had sensor attached Quote Share this post Link to post Share on other sites
Jon94VR 10 Posted July 29, 2013 Its got nothing reading though, even after a motorway journey of 15/20 mins, guessing the temp sensor is knackered, which one is it on top of the filter, guessing one is the temp and one is the pressure, but unsure which is which Quote Share this post Link to post Share on other sites
Jim Bowen 1 Posted July 29, 2013 Should be three sensors there, the small one that looks different to the others is the temp one, seems quite common for the wire to corrode where it meets the connection. Quote Share this post Link to post Share on other sites