TanVr6 0 Posted May 17, 2015 Best way to clean spoiler and lubricate lifters? Quote Share this post Link to post Share on other sites
GlosterOx 0 Posted May 17, 2015 There is a link Tan on the CCGB website for lubrication of the Spoiler Mechanism, see: http://www.corradoclubgb.co.uk/ccgb16/index.php?option=com_content&view=article&id=108:lubrication-of-the-spoiler-mechanism&catid=49:technical&Itemid=169 Ian. Quote Share this post Link to post Share on other sites
zygalski 10 Posted May 18, 2015 I would spray some 3-in-1 silicone lubricant on to a cloth & then wipe the spoiler supports in the up position, putting on a thin, even layer. Raise & lower a few times & job done. Quote Share this post Link to post Share on other sites
davidwort 0 Posted May 18, 2015 I would spray some 3-in-1 silicone lubricant on to a cloth & then wipe the spoiler supports in the up position, putting on a thin, even layer. Raise & lower a few times & job done. spoiler supports don't make a lot of difference, you really need to strip it all apart and lubricate the cables, while you're in there check if they are badly corroded, the design is supposed to separate the support from the drive cables to prevent water ingress but it doesn't seem to work very well and the cables can go rusty jamming the whole thing up Quote Share this post Link to post Share on other sites
