ryan_welshman 10 Posted June 23, 2016 Hello all Need to turn the carbs and fancy giving it a go myself. Anyone know a good balancer tool thats not stupid money? To be used on twin 45mm dellorto carbs Cheers Quote Share this post Link to post Share on other sites
MZpog 10 Posted June 23, 2016 I may have one of these in my garage still if you want it. http://www.ebay.co.uk/itm/Carb-Balancer-Carburettor-Balancing-Tool-With-Flow-Carbalancer-fits-most-carbs-/180748349770?hash=item2a1570f14a:m:msFffbqox0zmocZe5BIvwQw Crude but worked on my twin carb MGB. Guess it will only work if each of your air inlet trumpets have a separate butterfly. Quote Share this post Link to post Share on other sites
ryan_welshman 10 Posted June 24, 2016 Doesn't have seperate butterflies per cylinder but if you have one spare with all the pieces to it and dont need it then ill have it off ya Sent from my SM-N9005 using Tapatalk Quote Share this post Link to post Share on other sites
MZpog 10 Posted June 24, 2016 Doesn't have seperate butterflies per cylinder but if you have one spare with all the pieces to it and dont need it then ill have it off ya Sent from my SM-N9005 using Tapatalk Not sure it'll work without separate butterflies as you partially block the intake with the black cone part, which obviously won't block if the other is open to atmosphere. You can give if a go if I find it. I'll have a rummage in the garage over the weekend. Quote Share this post Link to post Share on other sites
ryan_welshman 10 Posted June 24, 2016 Cheers Sent from my SM-N9005 using Tapatalk Quote Share this post Link to post Share on other sites
