Radio wiring

[vwfil 0]

Does anybody have a complete wiring diagram for the corrado radio?

 

I've sorted out the audio side and I've re-attached the iso plugs as they had been removed but I have no live or switch live from the power cables. I've checked the fuse board and I have no blown fuses so I'm wondering where the switch and permanent cables come from so I can check the other ends.

 

thanks

phil

[g0ldf1ng3r 15]

do you have a bentley manual? i think they have a diagram in there but im at work so cant check

 

could try googling....as this came up http://media.corrado-club.ca/images/vr6_corrado-1/EKTA-StereoWiring.gif

 

though it is canadian linky

[delfinis38 1]

Does anybody have a complete wiring diagram for the corrado radio?

 

I've sorted out the audio side and I've re-attached the iso plugs as they had been removed but I have no live or switch live from the power cables. I've checked the fuse board and I have no blown fuses so I'm wondering where the switch and permanent cables come from so I can check the other ends.

 

thanks

phil

 

I had a problem with my radio switched live and it was an ignition switch problem. but it doesn't explain your constant live.

[vwfil 0]

do you have a bentley manual? i think they have a diagram in there but im at work so cant check

 

could try googling....as this came up http://media.corrado-club.ca/images/vr6_corrado-1/EKTA-StereoWiring.gif

 

though it is canadian linky

cheers @g0ldf1ng3r yeh that's the diagram I used to resolder n heat shrink the audio and power side plugs back on that's complete but I need to know where the source end of the power cables is so that I can find out why there is no power. im assuming both will run from the fuse board both permanent and switched but I have no idea which terminals to look for.

[vwfil 0]

delfinis38 do you know where on the ignition the radio connects? I know its a brown cable with a red marking but would rather not have to pull my whole dash apart to trace it ha ha

[g0ldf1ng3r 15]

cheers @g0ldf1ng3r yeh that's the diagram I used to resolder n heat shrink the audio and power side plugs back on that's complete but I need to know where the source end of the power cables is so that I can find out why there is no power. im assuming both will run from the fuse board both permanent and switched but I have no idea which terminals to look for.

 

oh sorry i misunderstood

 

fuse board diagram - http://img.photobucket.com/albums/v640/a777ovl/etka/corrado/fusebox.jpg

[delfinis38 1]

It goes in the back of the ignition plug... You can split the cowling to check.

[vwfil 0]

It goes in the back of the ignition plug... You can split the cowling to check.

 

cheers man will take a look when I get home in 2 weeks! try n sort out the permanent aswell