Jim 1 Posted September 10, 2004 Worth mentioning though - I have no idea how you would be expected to get the hose off the fuel rail though - its in the most inaccessible place I have EVER seen. You'd need to remove all kinds of parts just to be able to get near it! Didnt help that the screw on that spring clip was facing the engine bulkhead / firewall kinda area - ie NO way to get a screw driver in there at all! Quote Share this post Link to post Share on other sites
olly elworthy 0 Posted September 10, 2004 hope its not an inlet manifold off job to get the fuel rail out just to get at that pesky screw,, :shock: Quote Share this post Link to post Share on other sites
scruffydubbers 0 Posted September 10, 2004 no you can get it out with the inlet manifold still on, its a pain though Quote Share this post Link to post Share on other sites
Henny 0 Posted September 10, 2004 you just need the correct tool Jim... ;) I've changed that pipe twice on mine since the rebuild with everything staying in place... 8) (had to replace it again after I was sold some crap pipe which burst within a week of being fitted... :mad: ) Quote Share this post Link to post Share on other sites
Jim 1 Posted September 10, 2004 Well feel free to share as I may well have a go at it again and replace both the clips and the pipe for a fresh one now that i've coughed up and ordered them all!! Quote Share this post Link to post Share on other sites
Trilidon 0 Posted September 10, 2004 same spot mine was leaking Quote Share this post Link to post Share on other sites
