ryan_welshman

Probably been asked on here before, but is a full passat sunroof mechanism able to be put in a raddo? Anyone done it? Cheers

The mechanic I deal with only deals with older cars and knew exactly what was what and hes not a "lets have a go and see what happens" kinda chap. So my raddo is in pretty safe hands :)

Ah cool cool. I drive through ludlow most days for deliveries. Ive seen 2 other raddos in shrewsbury, g60 an a vr I believe

where abouts u from mate?

Im plannin a clean out and clean out day sunday morning!

Cool. Mine is still an ongoing project, hopeful paintshop work soon cos it looks a bit tatty than what the pics show, but in the pic I spent a good 4-5 hours wash t cut and wax

Sounds a plan!

Shrewsbury, shropshire mate

Was literally an alan key on the meter head and it solved it!

Ha! It was my works car park after hours so doesnt count as douchebag parking :-P

*im from shrewsbury

Nice rado, im grpm shrewsbury, (not too far!) Mines a work in progress, just got the engine runnin sweet today, just bit more tweaking needed

Worth a try bud, I went to a volkswagen dealer but they were useless and couldnt do anything as they just deal with new cars only!

Got a 92 2.016v and had trouble with running rich, erratic idle and stalling on low revs/ heavy breaking and engine running more lumpy than cold custard!! Took it to my garage today, the chap simply adjuated the fuel/air ratio with an alan key on thw meter head and the hydricarbon level went from 5500 to just a mere 120, now she runs perfect and alot more nippy!! Over the past few months I have replace the thermostat, water temp sensor, cleaned out the throttle body as well as the components on the air box and double checked for any air leaks but it seemed to be sorted by, as I said before, the mechanic adjusting the fuel/air ratio screw on the meter head! Hope this helps other people with the same problem :)

My rear wiper stops and starts when activated, sometimes stops halfway on the rear screen then moves a bit, then just doesnt seem to stop in either up or down. Could this be a damaged relay on the fuse board? Motor? Cheers

Is there any reason why someone would put an abf head from mk3 golf onto an 9A block? "Extra" power? Do the two work together as the original head had been damaged? Any reason??

Hey guys and girls. Just got myself a second hand scorpian back box and it could do with a quick clean before I put it on, whats the best way of cleaning and polishing?

Ahh ok, that makes sense. Cheers

Anyone have trouble where one sidelight will stay on after ignition is switched off? Goes off after ignition is switched on an then switch is flicked a few times but juat annoying to check everytime to make sure the battery isnt run flat!

Still got the throttle body with throttle sensor for sale? Also, would you be able to post the scorpian back box? Pm me if you can bud Cheers!

Im after a price for 2.0 16v 9a throttle position sensor, I believe the part number is 048 133 154 Cheers

Got a 9a 2.0 16v and I think I need a new tps as the engine is running very lumpy, rich and wont hold throttle Tps part number on it says 048 133 154, vw cant supply me, anyone suggest where to buy one or how to test my current tps to see if thats the problem? Cheers

Hello all. Got myself a 2.0 16v corrado a few months ago and turns out the engine is a hodge podge of bits and utter s***, so ive decided I want to put a vr6 into it as ive heard its a reliable engine and more power equals more fun! Just want to know if anyone has done a vr6 conversion or where I can find a decent guide etc