kennyvr671

Haha thank you for the comments mate, and yesss I mean I domt think anyone every gets to stop working on there corrado 😂😂 and well theres a couple good 'how to' thread on here and vortex, just make sure you get a proper non abs master cylinder with the 4 take offs, otherwise theres no failsafe if a piston fails. Brake lines are 100% doable mate its actually pretty satisfying 😂 I used kunifer copper/nickel

Yess! Definitely it's always good to meet up with local owners, theres a bloke over Northampton way called Jimmy, hes trying to build a network of corrado owners in the midlands hes got it up to some pretty big numbers tbh, friendly guy too, always organizing meets and convoys to car shows ✊

Haha who isnt a tea fan when your working on cars 😉😂 ahh okay, Silverstone is about half an hour from my unit I'm just down the road from stealth racing, which has been a huge help 😂

Hahaha I'd be happy to help mate, I mean as long as there plenty of tea supplied 😉😂 where abouts are you?

Haha I wouldn't call it the ultimate restoration, theres alot better restorers out there than me, I just want to learn and make it look how I want it 😂 but that's awsome if its inspiring you, you got much planned with yours mate? And yess I've deleted the whole abs system so all the wiring and everything, took a while to source the right servo and master cylinder but it was worth it, and yeah deleted the power steering system too so just looped the steering rack for now and got a shorter aux belt (it has to be narrower too) and hahaha I wish I worked for McLaren 😂 I got it from the British super bike team I mechanic in, called FS3 Kawasaki, I've managed to grab a few bits that were laying around, that's where the carbon cover came from too 🙈

Thanks Mate, just need to keep going and finish it off now :dance:

Haha that's what I'm worried about :lol: I'll never want to get it dirty :bonk:

Thanks Fla, it took a lot longer than expected, but then again it is a corrado :bonk:

Thanks mate!

Not that i would say I'm any kind of expert with any of this at all, but if anyone needs some advice about the stuff I've done or wants a hand I'm very happy to help and give my knowledge of how i did everything. the corrado community have helped me massively, everyone has been so happy to help me, so it'd be nice to give back a bit :thumbleft:

so these are the last pictures I've got, to date, i managed to get some proper gold wrap from the race team i work for to wrap the manifold and i'll wrap the intake elbow my brother made ( i just don't want to cover up those welds also some more pictures of the nice shiny paintwork and the interior all finished. i have to say the 02J shifter conversion is amazing! battery relocated into the boot and just needs a sealed battery in there and battery box. and then the latest pictures of the engine bay pretty much just needs fuel lines and it can be started. i managed to grab some bits of carbon from work too and make a couple covers with them :D which i think finishes of the engine bay nicely.

now for the most expensive part :thumbleft: wossner high comp 3.0L pistons and PEC h Beam rods a big Valve kit from america with high flow valves and titanium retainers and HD valve Springs, then all port and polished and everything balanced, fluid ampr pulley and a Helix Clutch. alot of help from vince at stealth with sourcing bearings and shells and bolts for me :cheers: and then the engine had literally just been fitted in the engine bay when i took the last picture

and then this is the engine bay being built up ready for the engine, i bought some copper/nickel brake pipe and the tools and made all the brake lines myself, its actually very satisfying. and the re-wrapping all the wiring harness with Tesa loom tape and shortening and lengthening bits to route it where i want it to go. and then i recovered the headlining and sunroof with faux suede so its all black, managed to source a black sunroof controls and Porsche black sunvisor clips but i just painted the sunvisors, then the interior could start to fitted starting with the dash.

After a lot of messing around i think I've figured it out, so here's some pictures :dance: this is the shell prep and then just after we took the masking off

and thank you, its taken a lot of hard work and so sooo many hours but iv'e learnt a lot along the process doing as much of it myself as possible, just cant wait for the first drive:cool:

is there an easy way to upload pics onto here by any chance because i'm really struggling to make it work since tapatalk has gone down:shrug:

So getting it finished last year just didn't happen, but its very close now and should be starting the engine very soon, the engine is built and in the car and its wired up and pretty much done just a few little bits left like the fuel lines and drive shafts and stuff but i am so chuffed with how its come together it looks even better than i could of hoped!!:cheers: it will defiantly be out this year and very soon if all goes to plan. posting pics up is alot harder now tapatalk and completly died but i will get some up soon.

Hi Dave are these still available?

I'll get some pictures up as soon as I can. I'm really struggling to get my phone to upload them at the moment. And the tapatalk app has completely stopped working on me

Hello there people. Ask my worry this project hasn't died 😂 I've actually been flat out working on it spending most nights in the unit and I'm hoping it will be on the road by the start of next summer:D . But yeah so basically it's had it's full respray!! And it looks absolutely amazing if do say so :) . I helped the body work out every day it was there sanding down and doing the bits you can't get wrong 🙈 but yeah all sprayed and back in the unit and since then Iv been busy building it back up. Iv completly retrimmed the headlining in faux Swade and coloured everything to follow black apart from the healingin sunroof trim sale thing which im not sure on how to colour and the sunroof controls which again I'm not sure on how to colour. Most of the interior us back in just waiting on seals and bits to finish it off. And if started rewrapping all of the wiring loom and routing it ready to have the engine in. I'll try and keep the updates more regular now that there's actually stuff happening. And I look forward to seeing any of you guys at the shows next year :D

And here's my sand blasted and painted crash bars and slam panel and the azevs :) Sent from my SM-G950F using Tapatalk

Here's some of the work done around the windscreen which was by far the rustiest part on the car Sent from my SM-G950F using Tapatalk

Hello again it's been a while [emoji23] but I have made decentish progress. The gearbox is now completly finished after a bit of nightmare but thanks to the corrado community and some advice from Vince at stealth it's done. If ended up swapping to the newer corrado 1st and 2nd gear and selector because there the only ones that the synchros are still available for so now every synchro and every bearing has been replaced and all preloads set by myself and all gears superfinished with the high ratio final drive, LSD and the 02J shift tower conversion and the end results looks better than I even hoped so I well happy there. The body is now ready to go for the respray so that will happen in the next couple weeks. Alot of work had to be done on the rust around the windscreen which was a massive headache but now it's all done and all other rust on the car has now been sorted and primered including the engine bay which I havnt really smoothed at all if just cut the battery bracket off because that will go inside the car. I now also have the bonnet, boot, front and rear bumper and passenger side wing ready for paint and I'm just waiting on the driver side wing to arrive and then it's just the engine to build and then job done :) Iv also bought a set of Azev A's along the way which was a bit of an impulse buy [emoji23] Sent from my SM-G950F using Tapatalk

Hahaha ahh I'm not thinking properly it was supposed to say "doesn't matter what colour Just as long as it's mint"[emoji23][emoji23] sorry mate Sent from my SM-G950F using Tapatalk

I'm looking for a drivers side late wing doesn't matter on the colour just as long as it's mint or as close as mint condition. Thanks in advance Sent from my SM-G950F using Tapatalk