dannyp01
-
Content Count
23 -
Joined
Everything posted by dannyp01
-
Turbocharge your 2.0 16v
-
Does that make a difference what he's done with the boost return inlet ?
-
What's mfa reading 1850 in bar/psi ?
-
I'm sure you could afford them jim
-
These are my 17" BBS RKII's
-
My water pump seal was leaking, although I could only see it with the engine running when I looked underneath.
-
The guy at jbs says he always makes sure oil is getting through the charger before he put them back on, I don't know how he checked it though.
-
The charger was done about 4k ago by jabba, but its just been to JBS to have a new water pump fitted and they found the oil feed in the charger was blocked, have'nt had the car long (3 months) only just figued out the mfa.
-
Hi Guys Took a boost reading off my MFA in third gear up to the redline in my G60 and got 1860 I have a stage4 charger and 68mm pulley so I believe I should be getting around 2000. please advise what the problem could be.
-
They have different maps for the same chip depending on your setup. Contact Pitstop Developments they'll tell you more.
-
How do you put it into diagnostic mode ? I tried it once but it would'nt stay on when I started the engine.
-
I would like to know what BHP your getting because I have the same spec as you and only got 179bhp at stealth RR in june. I don't know what boost I'm running though.
-
Its booked in at JBS on wednesday has anybody had it done before, just wondering how much it's going to cost me.
-
Right then guys What the best/easiest way to replace or remove the water pump on my G60 as I think the seal has gone ?
-
Well its definately water and it looks like its coming from a nut on the head with a pipe on it, I could'nt get very good look and you know how many different pipes there are on these engines I tried to follow it best I could. I'll have another look tomorrow when the light is better.
-
Hi Guys Has anyone had this problem before, it looks like its coming from the head end.
-
That was the one. Which part off the pulley should measure 68mm is it the outer rim diameter or the inner where the belt lies. Renshaws G60 had the standard i/c and his did 199bhp.
-
Has anybody else got a 68mm pulley from Jabba, because mine is meant to have been fitted with my stage 4 charger got the reciept and everything, but it looks like an old standard one where as other places like pitstop dev sell ally ones. Have'nt had chance to measure it yet. Perhaps that why I only did 179bhp on the rollers at stealth on sunday. :cry:
-
Cheers Lads I think i'll just change the intercooler and thats it. Then start saving for a 20vt to drop in. If anybody wants any welding equipment I work for a welding wholesaler so I can get machines and supplies at decent prices.
-
get yourself to jabbasport in p'boro or dubsport just up the m6 in manc
-
If you want to see the car it was item no. 2480633339 on ebay
-
sorry about the shouting the jabba stuff including the charger was done about 3k ago
-
Hi guys just became a dubnut and bought a nice g60 off ebay It has jabba stage 4 charger Jabba 68mm pulley and chip Jabba or jetex induction kit Magnex exhaust from cat back Please advice what the next step should be to get more power Also what bhp should i be getting with the mods i already have ?