Jump to content

NWDSdax

Members
 View Profile  See their activity

  • Content Count

    23

  • Joined

Posts posted by NWDSdax

  2. Posted

    My 94 VR6 has a wooden gearknob fitted which looks like it’s from a mk4 Golf. Really doesn’t match the interior and period correct Momo wheel I’ve bought. Has anybody fitted a leather knob from another model without too much work?

    Thanks in advance

  5. Posted

    I’ve recently had some Coilovers and new wishbones fitted at a local garage but they have said when they refitted the antiroll bar it was fouling on the wishbone so they have had to flip it. Seems abit strange to me. Does anybody have any pictures of there wishbone and arb set ups so I can compare them to mine to see if I can spot anything wrong?

    Thanks in advance

  6. Posted

    The spare unit is faulty also! But I can send that one off to be repaired, then once it detours just a matter of swapping them over rather than leaving one of the car and waiting for it to return fixed before I can fit it.

  8. Posted

    My corrado 1994 vr6 ABS isn’t working! Scanning it brings up 4 codes

     

    00259 Abs inlet valve front right (N99)

     

    00276 Abs outlet valve left rear (N136)

     

    00532 Supply voltage B+ static-no indication on display

     

    00283 Front left Abs speed sensor (G47) static-no indication on display

     

    Any body shed any light on them? I’m assuming a speed sensor and pump probably? Do have a spare I can send off to be refurbished

    Thanks in advance

  9. Posted

    Part of my windscreen seal was not pressed in properly! On closer inspection looks like there’s quite the build up of dirt behind there! I know they are prone to rust in this area! Was just wondering if it would be a good idea of pull the seal out and give it a clean behind there. Is it just a case of pushing the seal back in, or do I need a proper windscreen fitter to do it?

    Thanks

  10. Posted

    I’m going to treat myself to some mid range Coilovers for my vr6 in the next few weeks, just wondering what people’s opinions were. AP, V maxx, or something similar.

    Thanks

  12. Posted · Edited by NWDSdax

    In the next few weeks I’m going to be stripping the car down for a paint correction. Il be removing the rear badges and noticed some cars have colour coded corrado badges. Have people painted them themselves?

    Or is it possible to buy new replacements from anywhere? I’d like to refresh all 3 badges while thy are off really?

    Thanks

  13. Posted

    Newbie here, when I bought my 94 vr6 it had no headunit fitted. I bought a kenwood replacement off eBay and plugged it in using the original iso blocks but when you remove the key it forgets the settings. I’m assuming the permanent and switch live are wired the wrong way round? I’m a novice with anything electrical so if anyone could point me in the right direction to sorting it that would be great.

    Thanks

  18. Posted

    Newbie here, I’m going to view a vr6 tomorrow which looks like a lovely example, only issue it has is the abs light is on. From a little googling I’ve found the most likely fault is a sensor. Then others could be ABS pump,ABS ecu, or the brake pedal position sensor. I was just after some info on possible cost for each, and if parts are easily available.

    Thanks

  22. Posted

    Hi , newbie here. Looking to a Vr6. Must be solid with bodywork in good condition with reasonably mileage. Only thing I’m not a fan of is cream interior, everything else considered. I’m based near chester but will travel for the right car. Budget of £5000

    Thanks

    Darren

  23. Posted

    Hi , newbie here. Looking to a Vr6. Must be solid with bodywork in good condition with reasonably mileage. Only thing I’m not a fan of is cream interior, everything else considered. I’m based near chester but will travel for the right car. Budget of £5000

    Thanks

    Darren

×
×
  • Create New...