Rhodri

Cheers for that guys. Another problem I have with the roof is that it will only open on tilt but will not open backwards or it will not close. What can i do/need to rectify this problemo?

Can anybody help me out here please? My sunroof decided to stop working a couple of months ago which resulted in me having to close the sunroof by removing the interior light panel and use the allen key. Yesterday i noticed that water was begining to seep through causing the headlining to become wet and there was a little drip falling onto both front seats. Went out to the car this morning and there was a puddle of water on the passengers seat and a damp patch on the drivers seat :cry: . Guys what do i need to sort this problem out? Cheers Rhodri

How much work would you say it is to do a G60 conversion or would a 1.8t be better? Hope i dont sound like a dick asking these questions but my knowledge of VW'S isnt that great.

I have a k&n panel filter (air box isnt drilled), kr inlet cam and a miltek system with de cat pipe and a jmr down pipe. I also have a ported and gas flowed throttle body waiting to go on. What other mods can i do to give her a bit more go?

Where can i get german style number plates from with the german badges on?

Will the headlights from a 91 model corrado fit my 95 model ?

I have a 95 model 2.0 16v. What size inlet manifold is on the car 42 or 50mm?

The drivers side front hub on my 16v Corrado is on its way out. Will the hub off mk2 16v golf GTI fit?

Go for a Miltek, i am pretty sure you won't be dissapointed

Guys does anybody know for a how to guide regarding fitting Audi A6 handles. As a mate of mine is going to do them for me but cant give me a price until he knows what is involved. Cheers Rhodri

Anybody ?

I have a 95 model 2.0 16v. I want to put bigger calipers/discs on the front. I have got a set of 17's going on very soon. I am wondering if a set of 911 callipers will fit the front without changing the hubs to 5 stud (i have a brake specialist who will make me the discs in 4 stud)? Also will i need to replace the wear sensors and shim discs? I don't know if i am talking through my arse here guys. Cheers Rhodri

I am having a straighf through Miltek system fitted this morning with a de-cat and JMR Down pipe. I will let you know what it sounds like later on today. I know it might sound different to a G60 set uo but just to give you sone feed back.

On the car that i have seen in the magazine it seems as if the number plate is srill more or less in the same position

Yeah same here!

Hmm so possibly a ring around the breakers. What model polo would this have come from?

Guys i am looking to smooth the back end of my corrado. The way i want it to look is shown in Nov issue of Performance VW page 44-45. It says that a polo 6N number plate recess. Would i be able to obtain one of these from VW? Cheers Rhodri

How much of a job is this for a body shop to do and what sort of price am i looking at to have it done?

Hi guys i am having a couple of things done to my car next week and was wondering what sort of performance increase the mods will make. I am having a KR cam fitted and a Miltek exhaust system with a decat pipe and jmr down pipe? Cheers Rhodri

I am considering getting a set of 18x10 BBS LM wheels. I am looking to lower the car 40mm will these wheels fit or will i need to mod the arches?

Where is the best place to get a set of Koni coilovers and h&r springs from? Also does anybody know where to get a set of BBS LM alloys from? Cheers Rhodri

Whilst having the Cam put in what should i change while the car is in the Garage??

I am considering buying a set of 1800 16v cams for my 2litre 16v. Where is the best place to purchase a set from ?? Forgot to mention that i would prefer brand new ones as my engine has only done 59k.

I think there is a place called r-tec that specialise in chrome engine bay bits.

Does anybody know where i can pick up a set of these from for a 1800? And also roughly hoe much they are? Also are they on a exchange basis? Cheers