kasman21

i got them from ebay!!for 16v engine. cant seem to see where they go??? If anyone knows and they aren't for a 1.8 16v corrado make me an offer and ill sell them, but where else will make me some custome hoses??? cheers guys

Hi guys i recently bought these samcos and only managed to get 2 to fit my rado!!!its a 1990 1.8 16v. any ideas???or have i been ripped off and they fit another engine??? any ideas would be great!!! cheers all Zak

hi guys My heater has decided to annoy me!! its blowing only cold air and seems to only work on number 1!!! any ideas???? thanks zak

im not clocking the car!just want them replaced and to look authentic reading the gen mileage. my garage have said they will swop the clocks for a new set but the mileage would read 0! i only want the car to read the proper mileage so the car remains authentic to the way it should be!!! any ideas folks or where i can get some clocks?? thanks again zak

Hey Guys Does anyone know if it is possible to adjust the mileage reading on the early clocks, mileage on the clogs?? mine has stopped reading the mileage and i cant get a set of clocks that read the same mileage. I suppose im asking is it possible to clock them!!!!! thanks all zak

Hey all where is everyone insurance at?? mine is due in january??!!and want to get the cheapest quote possible!!! any thoughts would be qicked??!! thanks zak

I have tried to remove the bulbs but they dont come out!! So if i bought the mk2 golf unit, it would fit straight in. thanks

HI all My heater panel light has packed in!!its the early corrado style with the sliding controls. I know the corrado unit is very expensive and volkswagon. What i need to know is what other VW's are the same?? Is the MK2 Golf the same??passat etc?? Thanks Zak

where is the risister pack?? what else should i check?? thanks

Its blowing very slightly on the top speed, makes noise tho sometimes!! other than that nothing!!

Hi guys My Heater has stopped working, it barely works on number 4!it all of a sudden just stopped working!any ideas>??? It too cold in the morning!!!! CHeers

i know its been done but i cant find it, how do i get the switches apart??!!! cheers

oh and its an early corrado with the early sliding controls. thanks guys

Hey Guys I have taken my fog light switch out and basically i want to change the colour to blue, from that horrid green so it matches my stereo!!! I Hav tried to take them apart!!but cant get to the bit where i can try and change the colour, i know this mod has been asked before, but cant find the thread!!!!any help would be wicked!!!! Also I want to change the heather controls to blue from green, that too is stripped but how can i change it to blue????it seems the green wont come off, without removing the black surround too!!!! any help or ideas would be great fellas. Thanks Zak

Hey peeps hope you can assist, my rado pulls badly to the left if i brake strongly, bit scary to be honest!!!!any ideas what i shud check or change?? Anything would be great?!! Thanks guys

What do you guys recommend are the best tyres for lasing the longest??? cheers

whats the mod with exhaust cams??? what engine code m i looking for in the 2l bottom end???should i get any work done on the bottom end?? is 42mm better or 52mm inlet??? thanks guys zak

hi guys I running a few ideas in my head!! 1.8 16v engine ported and polished head by tsr ported and polished 52mm inlet 4 branch stainless exhaust manifold full stainless exhaust power rohr k&n panel filter, drilled box Its running nicelyy at present but anyone got any ideas how to increase it further or maximise what ive got?? ie 42 inlet??? exhaust cams???-whats the procedure for that is it easy?? anything else??? cheers all any advice or tips would be great! zak

how much did it cost??

Hey guys i decided to revamp my wheels and want to experiment with 2 spares i have got. What is the procedure of polsihing the outer rim on my deep dish dezent alloys?? The spares have marks where the laquer has cracked, how do you remove the old laquer??and spray a new layer. Im new to it but fancy doing it myself. Also thinking maybe getting the inner wheel done in the same colour as my rado and the rim polished, i think that will look tight!!anyone know of anywhere near lincoln or maybe notts that are good at doing it?? any ideas or contribution would be great fellas. thanks Zak

thanks all, ill have a go tonight!! cheers all

i have tried turning clockwise but the ride doesn't seem to get any stiffer. any ideas?? thanks Zak

i want to adjust both the ride height and adjust how hard the ride is. anyone got the ways of doing it?? i have tried to adjust by turning the top adjuster but the firmness isn't changing!!! any tips or advise would be great. thanks all Zak

anyone know of good value places in either lincs or notts that can polishing my rims???or maybe spray inner rimm and polish rim??? any help would be great! thanks zak

cheers guys all sorted it was the fuse above the fuse box out of sight!!!!!the yellow 20 amp one. thanks allot for all your responses, much appreciated!!!! zak