Jump to content

pbradley98

Members
 View Profile  See their activity

  • Content Count

    358

  • Joined

  • Last visited

Posts posted by pbradley98

  2. Posted

    No - there are two variations - early with a three pin connector on the motor and late which have a different harness connector but I can't remember the specifics of the late connector.

     

    I think you can fit an early motor to a late panel, but not the other way round....

  3. Posted · Edited by pbradley98
    Adding pics

    Finally got round to doing this, having bought a set of Sprinter's reproduced foam liners several years ago but never getting round to fitting it!

     

    Not too bad all in all, took about an hour to quickly scrape of the foam, then used a cloth to rub white spirit into the residual glue / foam residue layer and scrape off with a credit card to get back to pretty much pristine paintwork underneath (if only the same was true of the topside of the bonnet, which is definitely due a respray!).

     

    Then it was just 5 mins to actually fit the replacement foams - what a difference not to have crumbling, patchy foam!

  6. Posted

    I don't think there are many that fit the Corrado because of where the seat belt comes out of the chassi - I've got two of these which fit really nicely into the back of the Corrado - recommended by a few people on here. Not cheap (£90 at Halfords at the moment) but they should last until they are no longer needed, as they start as a five point harness, then you can remove the harness and use with an adult belt. My girls are still in these at 6 and 4....Hope that helps.

     

    http://www.halfords.com/kids-zone/car-seats/toddler-car-seats/britax-romer-evolva-1-2-3-child-car-seat

  12. Posted

    Thanks for the replies all.

     

    It's split from the section that pushes into the channel, so I'll see it the one from heritage is any good, as I think I'd need an awful lot of sealant to hold it down!

     

    Cheers

     

    Phil

     

    Sent from my C6603 using Tapatalk

  13. Posted

    Hi,

     

    My outside windscreen trim also needs replacing - I assume you can replace it without removing the windscreen?

     

    Can anyone advise how this is fitted - is it just a push fit or do you need to use a glue or sealant to hold it in place?

     

    I've (tried to) attached some pics to demonstrate the need!

     

    Cheers

     

    Phil5782516ca9ec2ab2af0b65339dfce3f8.jpg47519b8e58ed5c022efbe64719121943.jpg

     

    Sent from my C6603 using Tapatalk

  14. Posted

    Yep, that's right for how they function.

     

    I'm not sure on the connector locations, but think it'll be somewhere on the forum if you try looking for info on uprated looms (ones that use the existing loom, plus relays so that you get battery voltage at the headlights rather than losing a few volts round the wiring harness - well worth it if you haven't already....)

     

    Sent from my C6603 using Tapatalk

  15. Posted

    Insurance will vary massively - will depend on a load of factors and be anywhere between 100 and a couple of thousand.

     

    You may want to check prices for not garaging the car, as due to the increase in size of cars versus garage width, it can increase the premium if you're not in a high theft risk area as you're more likely to claim for paint from moving the car in / out of the garage!

     

    Sent from my C6603 using Tapatalk

  17. Posted

    What does the other headlamp do?

     

    The headlight you have as dipped is dipped when on dipped, then there is also an extra element in the bulb that comes on when you select full beam - hence the bulb has three contacts on the back. The light you have as main should only come on when you're on full beam.

     

    Hope that helps.

     

    Cheers

     

    Phil

     

    Sent from my C6603 using Tapatalk

  24. Posted

    Hey karmannski,

     

    If it was between 830 and 9 that would have been me.... Storm grey vr crawling through the rubbish traffic on my way to work at perkins!

     

    Didn't see another corrado about - were you in something else or did I just miss you?!

     

    Nice to be spotted - especially given it was first run out after a wash (although not that you'd know it now I've been to work and back!)

     

    Cheers

     

    Phil

×
×
  • Create New...