Bigdunk

yeah oall this happens with the ignition on forgot to mention it!!!

on first switch position side lights work fine but the light on the switch remains on second position no dip side lights on light on the switch remains lit i'm able to use full beam but only as long as i keep using the stalk no uprated loom and fuses are fine switch is fine power to tghe stalk looks ok is there an inline fuse i'm missing / relay the car is a lhd not sure that it will make any difference has any one had this problem or just me!!!!! a wiring diagram would be good if any one can help

thanks for the reply mate will follow that up cheers

my wiper motor has just packed in on my lhd g60 is it the same as a rhd if i wanted to get a breakers one if not i'm mecanically adept, can i modify a rhd one, is it cost effective to get mine reconditioned!!! dunk

hi dave been running with one broken handle for a month and now have two broken handles!!!!!!! how much for two repair kits?????? pm mailto:[email protected] cheers duncan

does any one know how to go about checking one of these??????

hello folks just been told about this site and hope one of you guys has any experience of my problem basicaly i changed the cam belt on my g60 lined up all the timing marks and wound the engine over by hand with a spanner to make sure the internals were missing each other then with the plugs out i wound it over on the key to double check the internals then with plugs in its wont start ie nothing out of the dizzy after talking to an auto eletrician he reckons a stray spark has found an earth through the ecu whilst winding on the key relay with 80 on it is buzzing and the rev counter goes bananas ive just tryed an ecu off an 8v golf that has no vacuum take off and the number 80 relay stops buzzing and the rev counter stops going bananas does any one have any experience of this cause its got me foxed!!!!!!!!!! cheers d