hotoval1

Come on guys there must be someone out there who can advise on this problem. If you do not know the cure maybe you could at least tell me how the two sensors work with the oil light and bleeper. It must be simple but I just don't know what to try first. thanks

Can anyone help?

Sorry forgot to mention the car is a 1991 1.8 16V.

The oil pressure light and warning bleeper are beginning to upset me. The sensor goes off when the oil is hot and the engine reving between 2K and 2.5K RPM. It does not go off above or below those figures and is fine at idle. The engine runs o.k and is full of oil. I am not sure I have the correct sensors as I seem to have three available wires (yellow, blue/white and blue/black) with two single spade connectors (black and white). Any helpful suggestions would be appreciated.

TTT

I know this is an old favourite but can someone explain the general steps required to repair a tilting only sunroof. Please don't try to scare me just point me in the right direction.

Has anyone any ideas with regard to swapping early to late door cards and the electric mirror switch on the drivers door. I followed the advice on the knowledge base and neither mirror works. As suggested I have one spare unused wire from the switch which is a blue one. Some of the other colours were also not as suggested and I have connected using the early colours to the pin numbers. Any help would be appreciated.