brian g60 corrado

looking at fitting 10mm front and 15mm rear ,i have offset of et42 16" 205/45/16. can i go any wider

whats best price for the momo race ,is that with the boss.

hi i had the same problem and diagnosed it my self it was the starter switch. took me a while to realise it but the switch was not supplying feed to ecu to dissy.changed switch[£15-20 from gsf] starts everytime.even thought it was immob so ripped it out it wasnt that. fit a switch anyway,only cheap and easy to fit.hop you sort it. brian

i think that 215/40 on 16" give you a smaller diameter than standard,this means that this size tyre would be spinning slightly faster than standard size.at 70mph you would actually be doing about 69.?mph. hope this helps . anyway can i have some more feedback on what tyres to go for. cheers. brian.

henny what are the yokos like in the wet and what size are you running

hi got some bbs 2 piece rims for mk3 can people give me some feedback on what tyres to buy looking to fit 205/45/16 size,was going to fit 215/40/16 but me thinks they would be a bit harsh.anyway should i get . toyo proxes t1-s , yokahamas A539 , goodyear f1s or is there any other good makes to consider. many thanks. brian.

how does this compare with a std golf intercooler in a corrado.or a gwerks setup 8bhp???

o.k. guys thanks for advice wil prob try thinner oil.

have already fitted new clip on the gearstick and changed the box oil to gl5 80/w90.but just find it hard to get 1st and 2nd.mainly when cold. also find the throw exesive,would adjustement improve this. brian.

just a bit sloppy to be honest,and just wondered ifit could be improved . and if a tool could be made up easily.cheers mike. brian

is it just a certan size drill dit or some kind of holding tool? would like to see a picture of one if anyone has one . cheers. brian.

hi all anyone out there know the procedure for adjusting the gear shifter cables on a raddo g60,ive heard that special tools are required. cheers. brian.

hi all ,i have an old front g60 mount spare and was wondering if it is possible to convert it into a solid mount ,im sure i read somewere that somone had done this mod,may involve some cutting and welding me thinks.or is it get a new solid mount,and weres best. anyone out there tried this with good effects. cheers. brian. :roll:

think i used gl5 the last time i changed the oil so would you say that 75/90 is the thinest or best. thanks for advise david. cheers. brian.

hi my second gear is also poor ,and was wondering what is the thinnest oil for gearboxes ,is it worth using thin engine or p a s oil. cheers. brian.