Jump to content

g-tec

Members
 View Profile  See their activity

  • Content Count

    40

  • Joined

Everything posted by g-tec

  1. g-tec
    My g60 have sebring(oval pipe 114mm),great sound,not too loud
  2. g-tec

    mfa g60

    g-tec posted a topic in Interior

    Hi,my mfa is showing 99.9/100km in town,on highway it goes from 64.7 and so on,how to fix it thanks
  3. g-tec

    G60 idle

    g-tec posted a topic in Engine Bay

    When machine is cold it idles at 1300 and when oil tempreture is 50 after 3 to 5 min idle go down on 750,I know it is nirmal,is there some switch that when i start up my car it idles at 750 when cold so that I dont need to wait so long
  4. g-tec

    G-60 clutch kit

    g-tec posted a topic in Drivetrain

    Because my presure plate needs to be replaced i will replace whole kit,can i use vr6 clutch kit because i've heard that is better
  5. g-tec

    G-60 chips

    g-tec replied to g-tec's topic in Engine Bay

    Thank you all,i will probably go with SNS
  6. g-tec

    G-60 chips

    g-tec posted a topic in Engine Bay

    Can someone tell me which chip is best for g60(sns,rpm,theibach,h&s,bar-tek,autotech....)
  7. g-tec
    '90 151000km,everything is standard,engine is very good,no smoke from exaust,i use castrol magnatec,before that mobil 1
  8. g-tec
    It seems to me that my boost return is getting lots of oil trough valve cover.Is that ok?
  9. g-tec
    But with bearing puller that I bought you can remove all seals and bearings and that means the nu202e too.When I take picture of a tool I will post it.
  10. g-tec
    I changed all bearings,i have bearing puller,bought for 20e,with that tool i removed all shaft seals and bearings
  11. g-tec
    Can someone tell me how to remove 6304,6002,6003,i was trying to heat with hot air gun but i was woried because it want slip,my gun heat on 350 & 550 degrees,do i need better gun
  12. g-tec

    spark plugs for G-60

    g-tec replied to g-tec's topic in Engine Bay

    Just bought NGK's BPR6EIX for 13e each,i was looking for BOSCH WR6DPO or W6DPO but didn't find
  13. g-tec
    NGK BPR6EiX or BOSCH W6DPO
  14. g-tec
    Thanks for answer
  15. g-tec
    Hi i have G60 several years and i am preparing to rebuilt g-lader,only thing i dont have is kluber grease,so i am wondering is it(must use for rebuilt) or i can go without?I know that you will sugest to send my lader to someone like g-werks but it is imposible for me and only way for me is to do it myself.I also have question about re-route kit for isv and block off kit,is it good modification and does someone know how to do it myself because like i sad(it is imposible for me to order) Thanks
×
×
  • Create New...