logix42p
-
Content Count
25 -
Joined
-
Last visited
Posts posted by logix42p
-
-
Ill join the list with all the same comments on quality etc
-
if petercabrio doesn't want these i will have them.
cheers
-
Really enjoying the stream some lovely cars on show
-
Ok thanks, id rather try a second unit because i'm not 100% sure its my master cylinder and then id probably send my old one off to get refurbished if that solves the problem.
-
That is prob why i'm having such a hard time sourcing one then. Out of interest how much are they charging for a rebuild, PM me if you don't want it on here.
Cheers
-
Hello,
I'm after a VR6 brake master cylinder for a VR6 corrado. Its the type with one port underneath and a bleed nipple / reservoir up top.
I've tried getting one but everywhere seems to think its the later 4 port one but that doesn't mount.
It looks like this one below
PLEASE NOTE: this is not my photograph and is one from someones previous advert.
Thanks
-
The problem i have is with the hall sender. The 3 wires going into it have completely broken. As far as i was aware you cant buy this part on its own anymore.
-
Is this a distributor model if so how much for it complete if it wasn't damaged.
cheers
-
hello, do you still have the distributor or did that go with the engine.
Thanks
-
As title really im after a complete dizzy rotor arm hall sender etc for a 1992 Vr6.
Thanks
-
Im 15 mins from swansea and have vagcom and could scan it for you, only problem is i am away for a week or so. But if you haven't found anyone else by then give me a shout.
-
Is your's a 92 K reg?Its a J reg 1992
-
Mines a 1992 and has a red badge has done since new as far as im aware.
-
how much for the passenger side door and tailgate.
-
The guy kempy posted about for wheels did mine while back was very pleased
-
thats really nice fair play
-
yeah my old golf vr6 had these on also.
-
id do this just bit scared it would make the rest of the paint on the car look pants :)
-
Hello, I have a mk2 golf 8v gti 90s spec PB engine code witha full stainless steel exhaust made and was wondering if it would fit my corrado VR6 CAT back, if so what work would be needed??
Cheers
-
Hello, im having a problem splitting the outer CV joint. What ive got is a hub assembly (from a dif car) and what the person has done instead of removing the hub assmebly they have just cut the drive shaft. So what i have the assmebly itself with a tiny bit of driveshaft poking out.
I have tried heat, big hammers etc and just cant seem to budge it.
Anyone got a suggestion.
-
Sometimes when im using the brakes i push the pedal and there is nothing at all the pedal can literally hit the floor. If i release it and pump few times the pressure seems to build up again.This happens randomly by the looks of things as in one minute i have brakes and the next i dont. They sometime even go whilst braking. Today however there what a horrible buzzing kind of noise coming from the rear. Could this be related or any ideas on the problem. ps its a 1992 VR6
-
make sure they put it on the back, i told the wheel place not to put em on the front and they did anyway and looked ugly.
-
Any more 3D printing projects?
in General Car Chat
Posted
If anything needs scanning i have access to industrial grade scanning equipment and not limited to size so would be willing to help out.