Jump to content

logix42p

Members
 View Profile  See their activity

  • Content Count

    25

  • Joined

  • Last visited

Everything posted by logix42p

  1. logix42p
    If anything needs scanning i have access to industrial grade scanning equipment and not limited to size so would be willing to help out.
  2. logix42p
    Ill join the list with all the same comments on quality etc
  3. logix42p
    if petercabrio doesn't want these i will have them. cheers
  4. logix42p
    Really enjoying the stream some lovely cars on show
  5. logix42p
    Ok thanks, id rather try a second unit because i'm not 100% sure its my master cylinder and then id probably send my old one off to get refurbished if that solves the problem.
  6. logix42p
    That is prob why i'm having such a hard time sourcing one then. Out of interest how much are they charging for a rebuild, PM me if you don't want it on here. Cheers
  7. logix42p
    Hello, I'm after a VR6 brake master cylinder for a VR6 corrado. Its the type with one port underneath and a bleed nipple / reservoir up top. I've tried getting one but everywhere seems to think its the later 4 port one but that doesn't mount. It looks like this one below PLEASE NOTE: this is not my photograph and is one from someones previous advert. Thanks
  8. logix42p
    The problem i have is with the hall sender. The 3 wires going into it have completely broken. As far as i was aware you cant buy this part on its own anymore.
  9. logix42p
    Is this a distributor model if so how much for it complete if it wasn't damaged. cheers
  10. logix42p
    hello, do you still have the distributor or did that go with the engine. Thanks
  11. logix42p
    As title really im after a complete dizzy rotor arm hall sender etc for a 1992 Vr6. Thanks
  12. logix42p
    Im 15 mins from swansea and have vagcom and could scan it for you, only problem is i am away for a week or so. But if you haven't found anyone else by then give me a shout.
  13. logix42p
    Its a J reg 1992
  14. logix42p
    Mines a 1992 and has a red badge has done since new as far as im aware.
  15. logix42p
    how much for the passenger side door and tailgate.
  16. logix42p
    The guy kempy posted about for wheels did mine while back was very pleased
  17. logix42p
    thats really nice fair play
  18. logix42p
    yeah my old golf vr6 had these on also.
  19. logix42p
    id do this just bit scared it would make the rest of the paint on the car look pants :)
  20. logix42p
    Hello, I have a mk2 golf 8v gti 90s spec PB engine code witha full stainless steel exhaust made and was wondering if it would fit my corrado VR6 CAT back, if so what work would be needed?? Cheers
  21. logix42p
    Hello, im having a problem splitting the outer CV joint. What ive got is a hub assembly (from a dif car) and what the person has done instead of removing the hub assmebly they have just cut the drive shaft. So what i have the assmebly itself with a tiny bit of driveshaft poking out. I have tried heat, big hammers etc and just cant seem to budge it. Anyone got a suggestion.
  22. logix42p
    Sometimes when im using the brakes i push the pedal and there is nothing at all the pedal can literally hit the floor. If i release it and pump few times the pressure seems to build up again.This happens randomly by the looks of things as in one minute i have brakes and the next i dont. They sometime even go whilst braking. Today however there what a horrible buzzing kind of noise coming from the rear. Could this be related or any ideas on the problem. ps its a 1992 VR6
  23. logix42p
    make sure they put it on the back, i told the wheel place not to put em on the front and they did anyway and looked ugly.
  24. logix42p
    voted
×
×
  • Create New...