leigh
Members-
Content Count
26 -
Joined
Content Type
Profiles
Forums
Blogs
Calendar
Articles
Gallery
Downloads
Store
Everything posted by leigh
-
car now for sale see cars for sale section
-
has anyone any experiance with bugpack engine mounts, i have vibratechnics front & rear gearbox mounts but looking for a cheaper alternative for the other rear mount, vibratechnicks want £160 + delivery :shock:
-
stelg60, yes intercooler made quite a difference felt more toquey low down and revs more freely at higher revs
-
yep, bonnet has been replaced at some time, it has no sound proofing underneath,was like this when i got the car
-
now has tinted rear lights, looks so much better i think
-
hi, may need a bit of help with a problem, my oil level seems to have raised a bit and smells of petrol, car runs perfect no missfires, and still pulls very strong on the road, put car on an exhaust gas analizer, co at tick over perfect, hc at 67 ppm so all thats going in apears to be getting burnt, at tick over at least, did a compression test and got between 110 and 120 psi on all cyliders which the autodater book says is right so no pistonring trouble, do not know what to do next, any ideas?. car has r1 charger, 68mm pulley&chip [jabba] front mount intercooler.
-
i see theres a pic of my yellow g60 from the national day in the sprinter
-
i agree with g60jay timings out, engine will run much hotter if valve timing or ignition timing is out
-
vw one is metal, part no 037103383l ,£73 + vat recently had one on mine
-
drink tea , talk cars, sounds ok to me, let us know when.
-
yes inbetween rad and grill, made no difference to water temps what so ever, only covers top half of rad, bottom still in the fresh air, i did mine like this so i could keep car looking original, from the outside at least.
-
dont know about hp gain before & after as i have never had it rolling roaded, but the car definatly felt stronger especialy at low revs, alot more torque { even my wife noticed it felt different } posted some pic in members gallery under my yellow g60
-
heres afew pic of my g60, present spec is jabba r1 charger, chip & 68mm pulley jabba induction kit & heatsheild forge alloy intercooler with custom steel piping bahn brenner rsr charger outlet milltec stainless exhaust with cat removed full leather interior
-
the intercooler i used was the alloy intercooler universal type 2 610x160x74mm, i then used 2 90-deg reducing elbows bore size 60x51mm to & from the intercooler to my home made steel piping, then 1 90-deg elbow from piping to throttle body, to fit the intercooler in i had to remove the front panel stiffner just behind the grill, then the plastic ducting bolted to the rad, then make up some brackets to bolt the intercooler to the rad, the rad is still in its original place, it is a tight fit either side of the rad but is in the perfect place right behind the grill, only had to remove the bumper to fit, will get some pics tomorrow when it stops raining
-
g60dan, it was me you was talking to at national day with forge intercooler can sort out part number if you like, quite easy to fit, cost about £250 all in with samcos, but i made my own steel pipes up, although power flow said they would make some up if i took car over to one of their branchs, also i piped mine up without a 180 bend , made quite a difference, a lot more torque, will sort some pics out this weekend if anyone is interested
-
i drilled and tapped my throttle body for a boost gauge take of, this way only reads boost and not vacum which i prefer
-
you have to remove front bumper to remove intercooler, becomes easy then
-
you might find it easyer if you make some marks yourself with white paint on crank,dizzy and cam pullys, ok if timing right to start with, this is how i did mine
-
would a late vr calliper not be the same as a mk3 golfs ?
-
hi, wonder if anyone can tell me if vr6 rear brake callipers will fit my g60 one of mine has seized up thanks leigh
-
no did not remove any senders, i think when i first turned the adjuster co moved but then went back to where it was
-
yep removed the cap on mine its blue
-
yep removed the cap on mine its blue
-
tried setting my co on g60 yesterday via the adjuster on intake pipe, was set at o.5 but which ever way i turned adjuster co stayed the same am i doing something wrong or do i have a fault, thanks in advance for any help
-
for the people with g60's & boost gauges what psi do you get at 3000 rpm & 6000 rpm, with what size pulleys ect, would be a usefull guide for others btw i get 10 psi at 3000 & 15 psi at 6000 with 68mm & jabba r1