krnau

Hi there, It's been a while since I last posted in the forum. I'm looking for a full set of cream leather interior including seats and door panels. This should be shipped to Barcelona but I'll pay for this, no probs! Thank you!

great, thanks!

could anyone confirm, please? Thanks!

LOL!!!!!!!!!!! :norty: :norty:

fixed. it was a missing (LOL) crank position sensor o-ring !!

no, it's not leaking from anywhere near the oil press switches :( yes the gauge may be telling lies. I'll take the car to a good garage (not the one I brought it to...) so the chap has a look at it. any comments are welcome ;) thanks!!

Hey, After doing the ABF transplant, I've noticed a huge leakage of oil. After spending several days trying to find the cause, I took it to a local garage. They replaced the oil sump gasket. still leaked. Crank seal (the one next to the gearbox) replaced, still leaks. Now they say that they don't know where the oil is coming from...... WTF???!!! so... may a high oil pressure be causing this?? Just to let you know that the oil light/buzzer does NOT act at all.... oil + filter were replaced 1 month ago by the way. oh! I forgot to say that I have an oil press gauge and it reads (when warm and cold) more than 6 bars at idle!! While with the kr engine it read about 1bar per 1.000rpm.... what may cause an extremely high oil press? worn piston rings??? would a compression test reveal this?

same here! I have to select "a bit" of 2nd, then straight into 1st. This way it does not crunch at all ;) I'm so used to do this, that I even do it when driving any other car!!

it was sold in ebay by "golf_girl" or something like this. can't remember, sorry. you may find it in scrap yards of course

I fitted an mk2 golf one and it fitted really welle. I own a KR in which ECU/wirings aren't an issue, don't know about yours, sorry

Why not getting a similar bolt of the same thread etc? That's what I did :) and it was only pence

so there's no way of doing this mod? :(

can it be fitted to an early non-sunroof corrado?

you could fit the led in one of the spare led blanks of the speedo :)

wow this is one of those things that need to be fixed in my C LoL!!! where is the other end (opposed to the door one) bolted? does the wing need to be removed?