woz31

try Hertz Hi-energy range i run HSK 165xl really nice components

Hi, i am trying to feed my audio addicition and wondered what other people have tried in their corrado's all in the name of sound quality. I will add pictures and details of my install later (got a bit more work to do on the door builds).thanks in advance for all i may learn.

i have had a read on this and have decieded to fit twin 120A alternators the thinking being an alternator will produce about 80% of its capacity at idle therefore two 120's should give nearly 200A @ idle that should keep 3 slash amps well fed.

it would appear that there is a 180A alt. fitted to the toe-wrag looks like time for flea bay

forgot to say i have a brand new vr6 120a alt. and i run the ac pump as an idler

just reading posts if i went 48v how would that be reduced to 12v again, i see what your saying with regards to voltage but going up then back down cant be efficient

3 slash amps with a fool on the volume dial , each amp fused for 60A and i use a pg crossover {9v line driver} my main goal is sq I can hear the power fading when i crank it up and i am bored of blowing speakers due to inconsistant power , i would prefere 1 alternator but i am not in the market for expensive custom alternator as i have burnt all my dollars on car hifi. think i might try an a6 allroad 190a alt. as it is water cooled. going to upgrade engine earth to 1 awg to match amp feed

hi, anybody done a twin alternator set up or hi-output conversion looking for 200A or more. thanks in advance

Hi, I havent posted for a while having just read a few of the recent posts I can probably answer a few questions. If your sorting out coolant pipes pay close attention to the oil cooler pipes mine rubbed through on the fan. Regards.

Hi,has anyone got a easy solution to correct my speedo, I have fitted 3.2 tt engine and due to erratic tacho and other problems i now run 98 passat v6 synchro vdo dash panel, The easiest way would be to adapt channel 16, does anybody know the login code? Any other ideas would be good,cheers, PS the speedo under reads 100 on the clock is probably closer to 130

After months of headache's trying to keep standard dash clocks i have now fitted 98 passat syncro clocks and they look funky in blue just need to recalibrate speedo,I think i have had more problems sorting the clocks out than any other part of my build.I tried later corrado clocks and could not stop the erratic tacho,the passat clocks also are non can-bus up untill mid 99.(using speed signal from a/c control panel).another solution and being vw clocks don't look out of place.

hi,anybody know the part number for a bigger brake master cylinder, too much travel since fitting 334 x 32mm front brakes and cant see it improving when the 256 x 22mm rear brakes get fitted anybody else running these brakes?

standard chn gearbox with quaife atb and standard diveshafts works fine for me

pin 23 yellow and red wire for corrado clocks, unless you need the immobiliser use corrado clocks much easier

to jezzag60 thanks mate your a star ,i've got a working if slightly eratic tacho i believe later clocks are the cure,thanks again,seems corrado and can-bus need not be a head ache any more.