cheesey

no your right its in the arch where you said to put the air holes on the arch liner has any one got a pic of a rally 1

thanks for that i did find that 1 i was told when i brought the car that it had a rally 1 on it but to be honest i dont know what the difference is between them has anybody got any pics for comparison any recomendation for a different intercooler from a different sorce

hello chaps im thinking of fitting a merc sprinter intercooler to the corrado G60 ive had a search through the forum and found a few bits and bobs but what i need to know is this the cheapest and easiest way to upgrade as a custom kit is £500+ would 1 from a different car/van be a better/easier fit has anybody who's done it got any tips or photo's of the install and where did you get the pipe work was it all bespoke or can you get stuff to fit off the shelf any help would be appreceated the quest for more power begins cheesey

G60 GONNA DO IT THIS WEEKEND HOPE FULLY THESE PIPES ARE mk1 PIPES I THINK THE BOTTOM PIPE HAS A LARGE END AND THEN REDUCES TO SMALL END IF NOT LEAVE EM ON AND BLOCK THEM OFF ITS HARD TO WORK OUT IF YOUR LOOKING AT THE SCREEN IN VW'S AS ALL THE PIPES ARE DISPLAYED ON THE 1 PAGE, SO I GOT THE NUMBER OF MY MATES CAR

JUST GOT SOME MY SELF 027121063C £7.82 026121053G £14.54 YOU NEED TO CUT DOWN THE THREADED UNION ON THE FILTER HEAD OR BUY A NEW 1 COST £7 CANT FIND THE NUMBER AT THE MO

i have seen the conversions just thought that i mite save some money lucky they werent to expensive i have emailed the supplier you never know they mite offer me my money back :lol:

brought some of ebay there CRAP had to bend the arms up to get them to wipe more than 2 inches of screen the drivers side clears about 80% but leaves a 3inch gap in the middle the passenger side removes the top 3 inches and the bottom 2 dont want to bend the arms any more incase the snap and gonna have to bend them back anyway i like ebay but this is the second crap thing in a month eg the bulbs that dont fit anything just thought id let you all know

i would like to thank JMC for the head light switch and the 2 hours he spent with me answering my questions and chatting and showing me the car and what i can do to it the guy is a star thanks cliff

i did email him and told them they were wrong never got back then when i left him bad feed back he left bad for me i then emailed and said it makes me look a bit stupid as i didnt check my hand book (dont have 1) but it makes him look bad for not answering his emails wants me to retract it but still hasent sent me an email so i want to know if its in the hand book if people want to start asking him questions could be good i think he,s from bulagria and has to get people to read the emails befor he can reply

sorry i could be wrong h4 sounds right

brought some bulbs from this guy the begining of december http://cgi.ebay.co.uk/H7-Xenon-light-bu ... dZViewItem are these the right bulbs for the corrado mines any early car 91 none of them fitted after taking the headlights out found out they should be H3 55watt head lights tw5 side lights are the bulbs stated in the advert the right 1's for the later corrado and are you told what the bulbs should be in the hand book he still hasent got intouch the advert said he was in london but the stuff came form bulgairia if im wrong iam wrong :( if not i will keep asking him different questions till he changes his advert :lol:

thank you simple and straight to the point no beatting around the bush long drawn out answers or going off topic you know what i mean cheers cliff :lol:

did a quick serch got to page 10 out of 111 got bored are differences in the rear light clusters from early to face lift as i want a set of early ones, standard set to replace the all red set ive got

cheers dec this is the conector in question go's into the loom under water pipe into block gearbox end the onlt feacher is the wires are very thin just thought of another question why is there a hole in the front of rocker cover towards the cambelt end cheers cliff

thanks for that anybody any ideas about the thin black and thin brown wire

hello new to the forum this is my first real post just got my raddo g60 doing the things that need to be done like finding where all the spare wires go a getting rid but under the bonnet is a thin brown and thin black wire with a proper push on black connector on it just hanging down by the gearbox it comes out from the loom next to the water hose that go's into the end of the block on the gear box side!!!!!.bit dark for pics at the mo and a blue and white wire taped off next to the oil filter housing. the sensor on the oil feed pipe to the charger whats that for oh yeah what fitting are the side light bulbs ,wanna get some LEDs dont know what 1's to get Any ideas chaps would be a great help