RIMnCHOP

hello ive recently noticed i have a split injector rail hose vw want 43quid without vat for it!!!???? :shock: the hose says 5x3mm onit which i presume is a 5mm inner diameter. ive found sum audi and corrado fuel hose http://cgi.ebay.co.uk/ws/eBayISAPI.dll? ... K:MEWAX:IT but the guy says it is low pressure hose but it looks the exact same :confused4: so iam a bit stuck at the moment was wondering if any of you guys know the pressure rating for the hose or any idears where too get sum hose from cheers :)

end caps thats what i need by the sounds of it does that fit over the 82mm filterhousing? cheers mate will nip too halfords and have a look

hello last weekend i decided to change the oil filter and oil on my 93vr6.after draining the oil out i put a 36mm socket onto wrench and tried to undo the oil filter. no joy the filter will not move tried rachett straps on the 82mm bit futher up still wouldnt budge. after a few more tries it eventually snapped the plastic 36mm bolt bit near the drain plug. :mad2: so iam ofiically stuck on how to get the bastard filter out :confused4: :scratch: was thinking last resort smash it out but i aint seen anyware what sells the oil filter housing? any help or advice much appreciated :)

ive found the problem!! AT LAST :D it was a totally knackered rear engine mount and a knackered inner cv joint. :mad2: :shock: its getting fixed as we speak so i can finally start getting it sorted for bugjam :D

iam thinking of getting sum bigger injectors for the vr6 as iam planing on runing sum schmimle cams and going to stealth to get a remap. was wondering what size the standard injectors are and if any of you guys are running any similar setups?? thanks

CHEERS GUYS much appreciated for the help. there is definitly sum resistance as th wheel goes round but the clunking only happens under hard aceleration. will get it down to garage at weekend an get em sorted. is it a big job an will i be eating bread an jam for week due to the cost hahaha cheers guys :D

CHEERS GUYS much appreciated for the help. there is definitly sum resistance as th wheel goes round but the clunking only happens under hard aceleration. will get it down to garage at weekend an get em sorted. is it a big job an will i be eating bread an jam for week due to the cost hahaha cheers guys :D

it is a 93vr6 and it was the passenger side shaft which was replaced

took her 4 a spin earlier and it definitely happens when i put the power on so iam stumped :confused4: :mad2:

yes m8 it was a brand new shaft

hello every1 ive recently had a snapped driveshaft had it replaced everything seamed fine. but there is a loud clunking sumtimes if iset off fast or when i really nail the power. it tends to happen in 2nd an 1st. iam very confused as people have said it is the gearbox ,clutch, engine mounts ???? so any help would be much appreciated

:D CHEERS EVERY1 MUCH APPRECIATED :D he's got back too me at the garage and it is the coil pack :( it was due for a service anyway so surpose it was a blessing in disguise :? well at least it isint owt major

top man cheers m8 will have a butchers at that now m8

HELLO PEOPLE ive just found out that my vr is having missfire problems and was wondering what sort of things are causing this and how much theese things cost to put right. :( :? any help or advice much appreciated 8) cheers 8)

HELLO PEOPLE ive just started to get sum serrious vibrations through the car when i accelarate it seems to be coming from the engine and not the wheels or sterring. my m8 thinks its the engine mounts or possibly the back box but he says everything looks sturdy underneath there. if its the engine mounts how much is it going to cost and isit an easy job or a pain in the arse :( ANY HELP MUCH APPRECIATED :D THANKS :D