winchbietch
-
Content Count
414 -
Joined
-
Last visited
Posts posted by winchbietch
-
-
There is naff all room clearance at the front of mine, about a finger gap at most.
-
:) I presumed not but thought it worth a shot, cheers man
-
Hi
Interested in the callipers, what size brake setup were they?
Im currently using 288 brake set up on 16" schmidt rims is all.
Paul
-
-
There specific to the Schrick.
They are available - google is your answer for companies stocking them.
I have made my own with gasket paper, easy peasy
Paul
-
Replied :thumbup:
-
If ur going to get replacement gears and rebuild it believe I have 5th and 3rd gears for when I went to rebuild my gearbox after blowing 3rd years ago..
Got offered a cheap gearbox just after I had bought them
Ordered specially in from vw.
Paul
-
Hey mate very interested
Just how much bigger is this charger to for instance Rams one?
Would that make it £50 off ur ebay price? - £850
Paul
-
:thumbup: thanks mate
-
As above - looking for a 70mm chin spoiler.
Anyone from the spoonfed group buy with one spare?
Paul
-
Gear knob recieved.
Many thanks .
Paul
-
Just the gear knob posted please
-
Il take the gearknob at asking price if still available
Paul
-
Rob (rsgntx)
Top bloke with easy transition - Audioscape pods as described.
Nice meeting you and having a quick chat - one lovely looking corrado you have there..
Made it to the hotrod show in Billing after - all in all a good day.
Paul
-
Il have them at asking price, where are you located mate?
Paul
-
N reg aqua blue corrado northbound on m5 junction 12 - believe vr6.
I was the one on the hard shoulder broken down catching a tan
-
Anyone happen to have a spare vr6 crank pulley and bolt and in bristol m5 area?
Mine has nicely come off!!
Broken down on m5 junction 12 north of bristol at present
Paul
---------- Post added at 1:26 PM ---------- Previous post was at 12:21 PM ----------
Looks to be sorted.
-
Hi just to let you know, i managed to dig out the golf units, they would may fit at the front but the pockets about 2 inches longer than the corrado units.so not really an easy fit.looks like they will be going on egay
Hi mate,
i might be interested if they are for a 6 half " speaker?
How much were you wanting for them?
Paul
-
I believe it flows into to the throttle body on that pipe.
note the small arrows depicting flow on the main pipes.
-
If its the same as mine, brass genuine one:
chamfered edge first into the hose.
-
I bet there would be a big call for red vr6 badges too.
-
No note with my Samco kit either, but then Amber didn't really know what hoses did what in all truth.
I fitted the samco's and blead system, no problem i thought.
I had all the dash undertrays out still from wiring jobs by the way
The next day turn on the ignition and you could hear gurgling for about 10 seconds from heater matrix area.
Blead system - again a few times incase i had an air lock - Same result..
I ended up trolling through the internet till i stumbled apon a thread about the brass valve, located it in a old knackered hose i had - fitted it and car is cured..
In all truth i doubt i would have heard the gurgling so well without lower dash area all stripped out.
Almost worth making a permanent thread post for all the people using after market hoses..
-
This is what it looks like
---------- Post added at 7:04 PM ---------- Previous post was at 6:52 PM ----------
http://forums.vwvortex.com/showthread.php?991266-VR6-Throttle-body-coolant-line-bypass
More info if you decide to block off / bypass
-
My 2 turned up today.
Many thanks. Paul
Redbourbons vr6 With extra grunt :)
in Members Gallery
Posted · Edited by winchbietch
Just looked at mine and its about 3mm clearance from manifold to fan
Not had any issues though - using the renshaw polly mounts so naff all movement