asw75r

Bentley says all three are 60 nm (44 ft lb)

Thankyou very much :D I will hold out for a vr one . . . :D

Found this on the search thing , I have a 94 L vr that has a bent/twisted slam panel that i would like to replace (looks like the bonnet has been pried open) i have seen one for sale on edition and he says they are both the same but i`m thinking they may not be ? does the vr have a bigger radiator ? i`m thinking the bit that bolts onto the front crossmember may not be long enough to reach it ? its from a 91 if that helps ?? i need to be sure so i can get this this weekend . . . .

I`ll take one too if I could have the details please :D

What suspension are you running ? My old spax sprung 8v mk2 was predictable but slow(ish) and then I vr`d it with konigsports and eibach antinroll bars and it was fantastic (all the mk2 vr handling talk about it being bad ? with the above suspension mine was predictable and fast, kind of like a mk1 gti on fast forward :D ) I now have a standard 94 Vr and it feels numb by comparison and I feel something is needed to sort the handling, I have had a few rear out moments that were not expected at all :shock: This could get expensive :lol:

I`m with tandino, just put the 2.8 in it that you have and forget the paypal problems. Unless your caining it all the time the little difference there is will not be noticed ? Oh and V8 from a land rover ? 125 or 140 bhp :lol: If my l plate 110 was owt to go by ? It`s a none event :nono: :scratch:

The track is correct at 56.5in (1.435mm) and it is the size and offset of the original wheels that alter the vr`s track to match the other`s (without the wheels its wider) So the vr`s track is wider but standard dimensions have a few differences to remain the same ? So I need et30 with 5mm spacer for the front and et15 for the rear :D It`s a 94 so it has the wider wings also Thanks for the help you guys 8)

et 35 on g60/16v ? et 43 on vr6 ? Is that correct ? Would that make the difference ?

Cheers :D 11mm now there`s another to ad the mix :lol: I have some 5mm spacers for these and some 15mm ones for the rear

First post :clap: :wave:

I have a VR corrado that I am looking to get some wheels for (9x16 all round) and after a couple of months reading different threads I am confused :confused4: The dimensions on this very forum says all models of the Corrado have 56.5in (1.435mm) front track There are alot of people on this and other forums that say the VR is wider ?? Now, I have done a mk2VR conversion a few years ago and understand that the mk3 is 25mm wider each side and is called wide track and I had to use different parts to keep 4 stud hubs and the standard mk2 width track Is the info on this forum correct and people are just confusing a Corrado VR with a mk3 VR or is the above dimensions wrong for the VR (I hope that makes sense?) I want my wheels to fill the arches but not stick out 2" :lol: The 9x16 et15`s have been on G60`s and valver`s unless someone has these on a VR I could see ? (I have done searches but the info clashes) :shrug: