paulg60

i have etka v6.31 and cant get it to fully install :mad:

etka will install but when i try and run it it comes up hardlock not present

can anyone shed any light on the problem, maybe some step by step instructions :wink: i aint to hot on a computer :oops:

i have on

2 x RHD clutch

1 x LHD accelerator

they fit the same as STD pedal rubbers

if you buy a RHD brake you WILL have to cut a rubber locating piece off the back and it WONT fit as good

So buy 2 x RHD clutch

1 x LHD accelerator

you will have to bend the accelerator cover slightly to get the curve in the same place as the STD pedal

i will take some pics as soon as i get chance 8) but these are the correct parts to use

i have put the pics from curbourgh on our site click my sig, go to show reports to take a look :D

i'll sort some pics out havent taken any since i fitted them i'll take some this week

i have done this with tt pedals 8) you need RHD clutch & brake LHD accelorator pedal DON'T get RHD accelorator its to small

he's a top lad really talented welder look at my car in the members section of our website there is a link to his site in the links page mps performance engineering. but bear with him he does get very busy

at least they are stilll german :wink: could be worse FORD go for it be different :twisted:

i got design 90's 8's all round drives superb 8)

i got the charger outlet with the reducing hose from a aircon G60 from the gti festival :shock: £30 bargin :shock: plus alternator cover :shock: £4 :shock:

cheers bally pics aint turned out to bad seeing as it was raining :D the only thing i aint happy about is the driver profile pic :mad: . but to be fair they did tell me in advance because the photographer forgot to take my pic :(

i have put the pics from todays meet at santa pod click my sig & go to the show reports section if you want to take a look :) :)

cheers valver shame i aint seen it yet :( thry said they were sending me some copies

i use H & R adaptors with design 90's had them on a mk2 golf before that with 928's on no probs at all with H & R . these might be worth a try advanced auto sport 01543 306681 they are dooing some adaptors for £140 :shock:

i've put some pics on our website from the deva show. take a look 8)

stoke dfunkt vw meet last night saw 2 corrados blue vr6 & white not sure what it was. We were on the milehouse pub A34 newcastle blue C came past a couple of times. Question is why didnt they STOP if it is anyone off here stop next time :wink:

I just installed a boost gauge havnt been out in the car yet so i dont know what the boost is. but on tickover is it a vacume reading i am getting? what should it be?

which boost gauge am i best getting one with bar or psi on or dosnt it matter :?

cheers Bally, nice pics Henny 8) :-P

ok general section it is :oops: cheers

i've put the all types show pics on the website look in show reports :D

found it http://www.gsfcarparts.com

looks like a new rack then do g&s have a website

£340+vat :shock: :shock:

i have spoted a leak from my steering rack :mad: coming from the passanger side rubber gaiter. does this mean new rack :( :( or is it worth just replacing the seals. how much is a new rack going to set me back? will it be ok to go inters in?

My H&R's have studs in them? are they a revised version?

if you have a vr6 the adapters are fitted with studs

vr6 5 stud

g60 4 stud

g60 ones use bolts into the adapter.

must be somthing to do with them already being 5 stud the porsche pcd ,ust be to close to the vw pcd

you can get some nice alloy borbet badges from scotford alloy badge with black writing come in a nice presentation box with a borbet keyring and sticker i had some for my old borbet T's work out about £25 delivered they are on the back page of the borbet cataloge you'll have to ask them as they don't sell many i was the first person they got em for. they'd never seen em :shock: look well cool tho somthing a little different