Jump to content

C-UNIT

Members
 View Profile  See their activity

  • Content Count

    43

  • Joined

  • Last visited

Posts posted by C-UNIT

  1. Posted

    I have some 16v parts for sale

    corrado rear parcel shelf custom made replica of the orginal, solid fits as the original just no hold ups due to weight, comes with pair of jbl gto 6x9 speakers fitted. covered in black material pics can be sent if needed.

    £100

    https://ibb.co/pw3HYrn

    https://ibb.co/b3YgQS9

    https://ibb.co/QN6nsyV

    https://ibb.co/d0HP7jX

     

    16v original fuel assembly swirlpot, holder, kjet pump and bracket it attaches to under car with fuel lines attached but not the full lines included. beacket has rust but can be cleaned coated. working condition pumps working good too.

    £150

    https://ibb.co/0cpSrhh

    https://ibb.co/zG9vYGQ

    https://ibb.co/vD4Qpcd

     

    16v original fuel tank with lift pump still in tank comeplete in condition.

    £50

    vr6 fuel tank the bigger 70l tank good condition clean no pump included.

    £50

    https://ibb.co/pXSbcFS

    https://ibb.co/yWHSHmw

     

    location west midlands

    Thanks

  2. Posted

    Hi 

    20vt goes well for sure, ill post some pics soon, the walbro will be 6bar+ so should be plenty to feed the fuel. i have 4bar fpr so either way it will be restricted to 4bar i have bosch 550cc injectors and hybrid ko4 with jabbasport manifold hoping once this fueling is sorted and i can get time on rollers i hope to see 320bhp+ not looking to push anymore altho they claim 350hp on hybrid. see what my mapper says. Engines fully rebuilt forged rods etc so should ok.

    Thanks for all your help

    sanj

  3. Posted

    Hi Si, 

    Firstly thank you for your detailed reply just the info i needed your a star!

    Sorry i should have said my corrado has 20vt in bay so due to my current fuel pump kr under car with filter is soo old the screws on the pump have almost perished and matter of time before major leak. the brack which holds it all as we know rusts so much its not in good state this is why i am planning vr6 corrado tank into mine may be walbro intank pump to replace original fuel pump thats in the vr6 swirl pot and remove undercar set up with just fiel filter. i have been told others have done this on corrados or mk2s and walbro being uprated will be sufficient to feed my 4bar fpr on 1.8t. 

    if all works i post update either way 

    Cheers Si 😀

  4. Posted

    16 hours ago, vw rule said:

    Golf MK3 fuel tank
    Part number 1H0 201 075AR 
    55ltr tank with no restricted fuel neck 26mm
    From 1992 to 1997

    Golf MK3 fuel tank
    1H0 201 075AS 
    55ltr tank with narrow fuel neck 22mm for unleaded petrol
    From 1992 to 1997

    I think the Golf MK3 fuel tank/s are 55ltr only and can come with two different sized fuel neck diameters of 26mm and 22mm. Whereas the Corrado is available in 55ltr and 70ltr tanks and I think only has fuel neck diameter of 22mm.

    Hope this helps

    Si

     

  5. Posted

    Hi, its been some time since i have done any upgrades but now my 16v h plate corrado fuel pump is old i need to upgrade.

    My question if any one can help me, can i upgrade fuel tank from current 16v 1990 to corrado vr6 tank or is my only option mk3 golf vr6 tank where i know the walbro fuel pump intank fits. i have been told vr6 corrado fuel tanks will fit and same as mk3 dimensions ? my current tank 16v has lift pump intank and under car kr kjet pump in swirl pot and fuel filter.

  13. Posted

    For sale 4 x BBS Alloys

     

    3 tyres are toyo proxes and 1 unknown brand

     

    1 alloy has curb damage few scuffs on some alloys as can be seen in pictures

     

    for sale due to bigger break set up they wont fit over Brembos now been used for motorway journeys and local driving

     

    now stored in my garage need space asap

     

    £150 collection WS1

     

    Thank You

     

    [ATTACH=CONFIG]77622[/ATTACH][ATTACH=CONFIG]77623[/ATTACH][ATTACH=CONFIG]77624[/ATTACH][ATTACH=CONFIG]77625[/ATTACH][ATTACH=CONFIG]77626[/ATTACH][ATTACH=CONFIG]77627[/ATTACH][ATTACH=CONFIG]77628[/ATTACH][ATTACH=CONFIG]77629[/ATTACH][ATTACH=CONFIG]77630[/ATTACH]

  15. Posted

    Hi, yes was fitted for a while with no issue or cutting required. hope the picture works but as you can see it fits in front of the radiator and i bolted it from the top of the slam panel the rad you can see is a large sprinter one i still had room for the 90 angle samcos to fit. you would have room to fit under the slam as well although the down support bracket would need a little hacking.

     

    [ATTACH=CONFIG]74179[/ATTACH]

  16. Posted

    Hi All,

     

    I have a Front mount intercooler for sale which was custom made By Radtec, Radtec are very well known in the intercooler industry and they made this unit personally for corrado spec, it fits in front of the slam panel or under where you feel you want it positioned.

     

    The size of the core length is 50cm Long

    Height if 18cm

    Thickness is 7 cm

    Can flow up to 350bhp

    Some signs of use and marks however fully working order and no leaks!

    Paid £350 few years ago as it was a custom item

     

    I will add pictures asap which will confirm its by radtec showing the radtec seal stamp. Selling as i have gone big turbo and need bigger cooler.

     

    £100 can deliver or pick up free / Paypal or cash on collection. Thanks

     

    [ATTACH=CONFIG]74164[/ATTACH][ATTACH=CONFIG]74165[/ATTACH][ATTACH=CONFIG]74166[/ATTACH][ATTACH=CONFIG]74167[/ATTACH]

  19. Posted

    Doeas anyone know if vw still make front bumper rebar support or doea it come complete with bumper, mines got rusty and dont know if i should just grind as much off as i can and just paint it, is it the case most front bumper rebars with age will have some signs of rust?? not sure help appreciated guys.

     

    Thanks

  25. Posted

    Thanks guys some good advice my feeling is to keep original color i dont have intension to sell but its so true unfinished bits like engine bay which i dont have plan to do may be in future but its not really a show car so aiming for the best finish i can get..if i was to chane color then its going to be done properly it will probably cost more. so i think if its done right helious can look amazing it is rare and recognised as a vw corrado color. i hope to post pics once its done..for now i continue to strip as much off as possible.

×
×
  • Create New...