philie

I bought the beru ones for my g really good quality.

I need mine done as the printed circuit board fried and I bought a second hand one of the forum but its got 192000 and mine only had 94k

Ok i found a guy in Dublin that will do it for 60 euro pretty cheap I think. But it would be nice to do it yourself.

Im in the same boat let us know if you find out how to do it cheers

I just got all of the bolts, washers and that T bar type thing for my g60 dont know weather there the same but vw ireland got them in the uk for me.

Just added mine in

Ok cool thanks for the heads up.Were is the best place to jack the engine up obviously not at the sump.

I take it the intercooler pipes need to come out to gain access?

Ok but is there anything that can go wrong or is it just straight formard unblot and bolt in the new. Like there is nothing going to fall on me?

Hi guys, Im fitting a new starter on Thursday and I was just wondering is there anything I should know before I start and possibly injure myself.

Got a set of clocks thanks to g60knight.

im not to handy soldering would rather just get the clocks if I can, are they hard to come by?

Yea checked the fuses when it happened I got the smell of burning from the clocks took them out and confirmed the burnt smell came from the back of the clocks but no burn marks.everything has stopped working but the green backlight on the dials and the indicator arrows.No handbrake light, oil light nothing.

Hi guys, I am in urgent need for a set of clocks for a 92 G60 as all of mine have stopped working. The clocks which have one connector at the back and a blue box thing which a little black tube goes into.

Ok guys I seem to be going threw a bad patch with the rado and its really trying my patience so could someone help before I go nuts. Ok about a week ago was driving in the rado and the time and mileage went from numbers to weired symbols for about a min. I stopped and started it and it all went back to normal.Then about a day later the same thing happened but this time when I turned off the engine the dials went blank and the clock would not hold the memory. So yesterday started it up weired symbols came on again then the rev counter went, the speedo, water temp, and petrol gauge are all gone reeding nothing, got a smell of burning plastic so took the dials out and there is defo a smell of burning from the back of the dials.The dials still light up green the indicater arrows light up but all the others dont ie, handbrake light battery light etc. So do I need new dials and if so if anyone has a set il take them asap I really need the car split up with the missus and need to get the 2 Kids around so any help would be appreciated Thanks.