Blackburry

i have replaced the starter about 5x(thanks for lifetime warranties) and bought a new flywheel. before i bought the flywheel my oldstarter was starting to miss the fw so i decided to replace the starter and flywheel so i bought aftermarket fw its the same size as the original same everything, new starter but it was doing the same as the last one. it barely touching the fw and it engages sometime to rotate the motor but for the most its grinding the every edge of the fw. any ideas to fix this? i have switched starters out about 5 times i have a G60 production date 8/89. car was working fine til starter proplem so replaced fw clutch(kit) since it was going out and starter replaced: stock 22lb. fw w/ 8lb. lightweight fw stock clutch w/ stage 2 starter

changed switch and relay.. fuel pump was workin before u could hear it before u cranked car now just nothing

well i got it running but now fuel pump doesnt work. if i run a hot wire it runs but its not working with the key anymore any ideas? :mad2: :confused4:

gettin relay tomorrow

i have changed everything: Distributor, cap, rotor, plug, wires, even digifant still no spark. am i missing something?? HELP!!!!!! :scratch: :confused4:

i have changed everything: Distributor, cap, rotor, plug, wires, even digifant still no spark. am i missing something?? HELP!!!!!! :scratch: :confused4:

Im working on a 90 G69 I have fuel and power to everything. i have power to the coil and the hall sender plug. but i have no spark from the coil even changed it to a new one. also got new spark plugs, wires,cap, and rotor all ground are good.. Timing is set it turns over but no spark. :( anyone got any answers? :?