nelds
-
Content Count
29 -
Joined
Everything posted by nelds
-
how much posted ?
-
Hi all, I'm after a black interior light. PM me wiv what you have and how much
-
merc monoblocks need the holes drilling bigger and you need to order longer bolts, there's lots of details on this subject on UKPASSAT forum as lots of guys run these rims http://www.ukpassats.co.uk/phpbb/viewto ... ts#p228779
-
fitted my coilovers yesterday and my passenger side rear was a bitch, took us over 2 hours to remove the bolt that holds the suspension base into the trailing arm. the bolt is now knackered and i need to source a new one, anyone know a part number or what size and length bolt i need to replace this, my car is currently up on jacks and i wanted to go to santa pod today :(
-
can you post some pics when these are fitted, i'm interested to see how you cut the bumper to fit them as one side looks spring loaded. Does it come with some kind of receiver to fit into..???
-
The history shows he's sold 2 as well !!!!........I'm deffo going back to the scrappers tomorrow to get that grill and badge i left behind !
-
I know a guy who did the leather seats in his MK1 using products from here http://www.frost.co.uk/productList.asp? ... erior+Trim he said it was brilliant and no colour transfer as the colour soaks into the grain for a permanant change. I'm going to get some for the wife's Cabby to change hers from beige to black
-
i managed to dismantle the panel without damaging it, the bulb looks like it wired/soldered in the holder.???
-
anyone..? :scratch:
-
I've used the search function and couldn't find my answer. I've just got the following Porsche 928 rims, 7j 205/50/16 ET65 pirelli p700 and was wondering what size adaptors to go for. I'd quite like the rears to stick out further than the fronts. It's currently standard suspension height as i didnt want to drop until i had my choice of wheel sorted. I have 4 x 100 on my Rado and i'm guessing the 928's are 5 x 130
-
I have an early spec and the bulb has blown in my heater controls (the slider ones) I've removed the front panel and dismantled it to remove the bulb and holder as they appear to be a single unit. My local VW dealer cannot find a part number or any info to order me one. I seem to recall on the MK1 golfs you had to replace the whole panel and you had no access to bulbs. Does anybody have a part number or more info...??????
-
Not sure if this is the right place to post this or not but i have a query.............I forgot to get fuel tonigth when i left work so decided to have a slow drive home. I was driving at 55MPH the revs were sitting at 2500RPM and the MFA was telling me 29.9 MPG....?????........is that right as it seems a bit poop for a 1.8 16V Rado :scratch:
-
How to change blub in instrumental panel
nelds replied to nmahi's topic in [Archive] Wiki Submissions & Collaboration
i got as far as removing them other screw but noticed the cables in the back. Do i have to unplug the cables...??....do they just push in..?? -
How to change blub in instrumental panel
nelds replied to nmahi's topic in [Archive] Wiki Submissions & Collaboration
i attempted this today, Mine is a 1.8 16V so it has the clock display in the left hand dial and the mileage display in the speedo. I followed these instructions and when i slid the clocks off it leaves the LCD displays still attached..??????.....are the clocks different to the VR....???........are mine meant to light up and if so how do i get to the bulbs...??? -
Does anyone know where i can purchase an upgraded headight loom, i've searched ebay and can't find any. I want one that'll do dipped and high beam :D
-
Mine also has a problem when cold.....except mine turns over but wont start, when it does start it stalls straight away and wont hold the revs...........????.....any ideas
-
the roof lining around my sunroof is soaked, the sunroof doesn't operate but the motor "whires" when i press the button. it appear to be closed fully, i've removed the cover but the manual close screw wouldn't turn. any ideas where water is coming from also what might be wrong for roof not to tilt or open ??
-
any pics of your ride with this set up..?
-
what's a fairly decent coilover to use ??
-
do the Corrado fuseboards have spare ignition live spades on the back of the fusebox....???........i know the MK1 golfs did as i ran a feed to my stereo and permanant live to my horn
-
i think they're D90's i'm looking to get. what size rims are you running there..???.....are they called 928 winters or something..?
-
they're Porsche fitment so it'll be adaptors.......looking to run coilovers unless i can get away with just lowering springs, what drop can i get away with on those rim sizes ??
-
7x16 fronts and 8x16 rears et52 offset. the front are 205/45/16 falkans and the rears are 225/40/16 falkans. would i need arch work and will the offset allow for adaptors...?
-
I'll take one fella, can you pm me payment details please
-
How to change blub in instrumental panel
nelds replied to nmahi's topic in [Archive] Wiki Submissions & Collaboration
just found these as i seem to remember someone doing this when i owned my MK3 Valver, not sure if it's the way or not but it says about changing the colour of the MFA display by replacing the film too. can't find LED part number either http://www.golfgtiforum.co.uk/index.php?topic=106641.0 http://forums.vwvortex.com/zerothread?id=1766647