G60 NUBE
-
Content Count
44 -
Joined
Everything posted by G60 NUBE
-
I have checked out h&R springs with koni dampers and the cheapest setup I can find is 750.00 is there another recommended make to try???? Rob.
-
Ok thanx for the info m8, Any makes you would suggest??
-
Anyone heard of jamex before? I think that these are also quite cheap. http://cgi.ebay.co.uk/VW-VENTO-CORRADO- ... 1c0f3feb78
-
Thanx peeps, I guess they be a bad idea then. Wot would you recommend for a nice ride, I dont want it to be to low. As i live in the countryside and the roads arent to good.Cheers Rob.
-
http://cgi.ebay.co.uk/QUALITY-GERMAN-CO ... 414e889278 there you go
-
:epicfail: sorry but i havnt learnt how yet
-
Hello, I am looking for some new suspension for my G60 and I saw some Venom coilovers on ebay only thing is these seem quite cheap, Does anyone know if they are any good? Cheers Rob.
-
Hello i have not long replaced my cambelt on my G60 and I think its a little tight. Just wondering if anyone knows the correct tension it should be at? cheers Ro.
-
Thank you, very helpfull indeed. Rob
-
Hello, am struggling with ignition timing, want to know how to set the timing to 6-8 degrees btdc? when my timing light only has an on switch and no other settings on it. Rob
-
Thats fine m8 dont worry, I phoned MARTINS ( my local VW dealer) and they can get one in for saturday morning and it will only cost 2.60 so sorted after all, thank you for your help, Rob
-
Nothing at euro carparts either.
-
I have just spoken to GSF and they say they have nothing listed i will try euro car parts and see wot they have got...........
-
Good idea, where is the best place to get a new bottom bolt from? coz I would go for vw but i dont know if they do them. where did you get yours?
-
I hav'nt tried yet as i hav'nt had time but as soon as i can i will get it back together and find out. if your bottom pulley bolt snapped and didnt do any damage then hopefully i will get away with it. Cheers for your reply. Rob
-
Hello, Please help I need to know if the G60 8V engine is an interference engine or not (if the pistons hit the valves when the cam belt snaps or becomes loose) as my cam belt went this morning and i need to know weather to check for bent valves. cheers Rob
-
Thanx for the reply i will wait till july. thanx Rob
-
Hello, if possible just remove the connector from the reverse light switch and bridge accross it with a wire ( with ignition on) if its just a faulty switch then the lights should come on. Rob
-
Hello, I am wondering if (H100vw) is still around for uprated headlight looms? If not then please could someone recommend a good place to get them as my standard lights are rubbish. cheers.