classic

Offers?

they dont look too bad in the light, all the above pictures were taken with the flash at night! here they are fitted to my car

* sold *

sorted! broken wire! :D so happy!

Hello guys, Can't say i have been on here recently, i have been using my other car (mx5! :D), so the corrado has been standing still. The car in question is a 1991 2.0l 16v, but its from a conversion, so i'm pretty sure its still running the 1.8l KR stuff. It will not start, so i have checked the easiest place first being the ignition side making sure it has a spark. When i removed the HT lead from the coil to the distributor, the lead sparks only once when starting, When put to ground on the cyl head. So i turn the key to start, it sparks once, then will not spark again until i stop cranking it over. I have replaced the coil, the cap (the graphite tip was found missing awhile back when i looked at it), all the leads are fairly new (1yr old silicone jobbies). i'm really getting depressed with it as i do not know what to check now, so i am begging for you guys for help! How can i check the 3 wire hall sensor? on the side of the distributor? As i guess its possible its not getting an engine position and would only fire once? Maybe? Anyhelp would be highly appreciated, i'm in the Yeovil area and would pay good money for someone to even give me a hand! Cheers! Vince

ah ok brilliant, i didn't know if the abs ones had a pickup ring on them that would affect the length / fitting of the outer cv joint. cheers!

Hello, I'm after a Nearside / passenger side Driveshaft For my corrado, its H reg and doesnt have ABS, Looking for a good condition one with both cv boots in good condition. Looking to spend up to £50 posted. Thanks alot, Vince

Borbet c's still available?

thanks for the picture, but sorry they are the wrong ones! goodluck with your sale

may of been asked already, but do you still have the wheels / tyres ? cheers!

hello, do you still have the clocks mate? And are they early type or later type? with digital odometer? pics would help alot! :D thanks!

local dealer wanted £38!! Unless you can get it for £20, then i can pay you?

bump still need!

i'll go into work tommorow and ask, thanks for the help guys!

Hello guys, i'm in desperate need of one of these clips that attach the Vacuum actuator + door rod to the door lock, It looks like this: And it needs to be not broken!

Light blue corrado, going out of yeovil :D mutal spotting !

bump

Hello guys, i'm after an early MFA ambient air temp sensor For my 16v corrado, Its obviously got to be working correctly and giving the correct reading or i dont want it :D ! Not wanting to spend alot on it either, thanks alot vince

confusing! Still not fully sure with what i should go with, should i just go with a 1.8 belt + tensioner then?

Hello! B) So the Cambelt seems a little shagged on my Corrado, But i got alittle bit of a problem, The car was originally a 1.8 16v, but it has been converted to a 2.0 16v But using the 1.8 head! (Was originally Kr, now has 9a block with Kr head Apparently). So my question being, is there a difference between the two cambelts ? And are the tensioners exactly the same aswell? Really confused atm so could do with some help ! I would just use my reg number but that will be finding cambelt kits for the original 1.8 :( Thanks alot, Vince btw, posted on edition38 too, so sorry for repost if u view it :D

Check the starter / exciter wire to the starter motor solenoid, make sure your getting supply when the key is turned to the start position, if its not then check for wiring cuts / corrosion / loose connections ect. (think its usually a blue wire iirc, but dont hold me to it !) Goodluck

i can vouch for swampy! I bought a set of front ones for my saxo awhile back ! More than impressed with the quality / price! Goodluck dude!

thanks dude, if you could drop us a pm with your paypal address and how much you are looking for it posted, that would be awsome. thanks again

http://the-corrado.net/showthread.php?57980-Early-drivers-side-front-indicator ?

Bump