Jump to content

Moshiko Levi

Members
 View Profile  See their activity

  • Content Count

    37

  • Joined

Posts posted by Moshiko Levi

  1. Posted · Edited by Moshiko Levi

    Er, the fuel pump on the VR does not prime on ignition in the run position folks, it only operates when the ECU signals the fuel pump relay to change over during the starting process.

     

    So you will never get a VR pump operating without the ignition on.

     

    i had it untul 3-4 years ago

    one day its stopped :(

  2. Posted

    Did this ever get solved. O have exactly the same issue with a 2.0 16v 9a engine.

    Ignition feed to relay ok

    Main Supply to relay ok

    Supply from relay to pump ok.

    Continuity between pin 3 on relay housing and pin 14 on my ecu ok

    Just no trigger earth from the ecu itself.

    Have checked all ecu earths.

     

    My car however wont run at all. So I've had to permanently earth the relay to get the car just to fire and move.

     

    i have the some problem for the last 4 years and i hat it !!

    my car is 20vt swapped 10 years ago and all was fine .

    4 years ago its happend :( I have not found a solution so I started to change things - i installed

    New gas pipelines

    New fuel pump X2

    New fuel relay X 3 ogignal !

    New ECU

    new Power line from the pump to a new EBOX.

    New EBOX .

    still the some

     

    what it can be ?

  3. Posted

    ONLY - first time command to fule pump ! not working...

    I have the car 6 years...(corrado swaped 20vt ) first was 8N0 906 018 A but now i got the wide band 06a 906 032 rp

    The first three years everything was fine ...but then one day - if I'm not mistaken fuel relay Stopped working

    I believe it started from the moment when I changed the relay .

    Over the years, I just did so many changes to the car - its a little hard for me to remember ...

    Of course I changed since then the fuel relay with a friend with Corrado - my worked with him great - and his did not work in my car good - also - and I ordered another 3 Original etc etc and try them 2

    The problem is just a switch for the first time - I mean - i turn the switch on - and I do not hear the fuel pump working and there is no fuel pressure in the pipes or in the fule clock .

    I turn on the car engine ( its a little hard for him to start the engine...) but After the engine is turned on

    after 5 seconds I turn off the car engine.

    Then I turn on the switch on and then I hear the fuel pump starts working (5sec bzzzzz)and I see that fuel pressure at the clock on 40psi + - .... (I mean is normal)

    The problem is - the first time the pump command did not get.

    I have not found a solution so I started to change things - i installed

    New gas pipelines

    New fuel pump

    New fuel relay

    new Power line from the pump to a new EBOX.

    New EBOX.

    after all some one told me the change the ECU - i had narrow band 8N0 906 018 A and now i cange it to wide band 06a 906 032 rp -

    but

    still the some

     

    Must help please

    why only on the first time command to fule pump ! not working...

     

    i saw that int the mk4 etc ... ther is " PRIME FUEL CIRCUS "

     

    As I understand - not sure if that's true - but once the door is open the pump is not working

    Of course that Circuit we do not have it in the corrado

    Is it possible to get around it through VAGCOM feature ?

    Or that it has nothing to do at all

  5. Posted

    yes this is the problme for now -the back of the projector is stick to the battery - and its very very hat :(

    its looks oem ... but 2 long in the back

    And so I ask from you more photos of the car - Taken from afar and lights are off... please

  7. Posted

    Came out great !!!

    Do you have a picture of the flashlight is not on - and the vehicle filmed from afar? :)

    Sorry - I'm just working on something like that - it's very interesting me - I will also upload pictures :)

  8. Posted

    Thanks! Yes the same rules apply, it's technically not legal because the headlight is e marked with a particular type of bulb. But then that also makes anyone with led indicator bulbs illegal too! Here is what they look like installed8e1353de885e7eec7571efa5336d89dd.jpg

     

    can u upload more picters please ?

  9. Posted

    When I put the key into the on position, my pump no longer turns on .

    i checked the M/02 Fuel Pumps Power - and no power

    when i jumped wires to the pump its start to works - The pump working when it gets direct power

    i installed new relay - 2 times !!

    - and diffrent fusebox !

    but its the some

    i checked this :

     

    12 Fuel Pump Relay (80, 67 or 167)

     

    1 Main Fusebox Starter Power (not used)

    2 Main Fusebox Start/Run Power connected correctly

    3 To ECU (Fuel Pump Turn-On) connected correctly

    4 To Fuse 18, Fuel Pump, Oxygen Sensor Heater Do not get anything

    5 G2/6 (not used)

    6 Main Fusebox Battery Power From 30B connected correctly

    7 G2/7, T1 (not used)

    8 Main Fusebox Ground (not used)

    9 M/4, U1/8, G2/5 (not used)

     

     

    Anything else that could cause the fuel pump not to kick in?

     

    Can I take the battery plus wire and connect it directly to M / 02? Does this solve the problem?

    Or it can make a problem? Or other damage?

  10. Posted

    When I put the key into the on position, my pump no longer turns on .

    i checked the M/02 Fuel Pumps Power - and no power

    when i jumped wires to the pump its start to works - The pump working when it gets direct power

    i installed new relay - 2 times !!

    - and diffrent fusebox !

    but its the some

    i checked this :

     

    12 Fuel Pump Relay (80, 67 or 167)

     

    1 Main Fusebox Starter Power (not used)

    2 Main Fusebox Start/Run Power connected correctly

    3 To ECU (Fuel Pump Turn-On) connected correctly

    4 To Fuse 18, Fuel Pump, Oxygen Sensor Heater Do not get anything

    5 G2/6 (not used)

    6 Main Fusebox Battery Power From 30B connected correctly

    7 G2/7, T1 (not used)

    8 Main Fusebox Ground (not used)

    9 M/4, U1/8, G2/5 (not used)

     

     

    Anything else that could cause the fuel pump not to kick in?

  11. Posted

    i have corrado 1990 - was kr and for the last 10 years its AUDI TT AJQ 20VT eninge .

    i have the originl audi tt instrument cluster and the original switch ignitio connceted , In addition to the switch and instrument cluster of the Carrado .

    the conversion was carried out 10 years ago - even before they knew how to break the anti-theft mechanism ( immobilizer )

     

    It was all right - until I decided that I wanted to Organize the wires and now it would not start the engine - or the ECU at all .

    PLUG G1/7 from the fuse box connects to the pin number 3 ECM . it had to give voltage over ther - but nothing gets there - . What could be the problem ?

  22. Posted · Edited by Moshiko Levi

    WTB: WTB : recaro seats motor only

     

    part munber

    535959761

    number 1 IN THE PIC

     

    List Date: 7/11/2014

     

    For more info, click here to view the original listing: WTB: WTB : recaro seats motor only

    --------------------------------------

    Want to Buy (WTB) Please Contact Buyer with offers.

     

    contactbuyer.png

    --------------------------------------

    the-corrado-forum

    f7ed2742-8872-4652-a89c-6f4788ed10632.png

     

    Mobile friendly version: WTB : recaro seats motor only

  23. Posted · Edited by Moshiko Levi

    Sean_Jaymo - Today I checked the connection of G1-3 and offline - that connects electronic throttle me in the car - when I give swatches is not receiving power

    Could be that's why the fuel pump does not start to work?

  25. Posted

    I opened the fuel pump tank and all seems right - all the wiers are conncted .

    I have a question - when I turn the key on - i need to hear the pump start working and I did not hear it right now !

    which of the connections gives this order to the pump to start working?

×
×
  • Create New...