TheVims79

Thanks Mate ill look into that about the alternator

Yeah the guy is basically a Milk dud! He really wasn't a VW guy he was supposedly selling his fathers car i know its a weird sounding story but thats what he told me. ---------- Post added at 2:14 AM ---------- Previous post was at 1:57 AM ---------- Thanks Mate about the Exciter wire i didn't know that it charged the charging circuit, Yeah with the car running the Battery reads 12.34 volts and when it was off i think it was like at 12 it was low i know so evidently there's obviously a charging holding issue. I cant test the car because i only looked at it once but i do know that it could be other things to ok here's the List. What about the 1. E.C.M. Electronic control module or 2.) C.A.S. Crank Angle Sensor or 3.) C.P.S. Crank Position sensor Or 4 the P.C.M modulator. I heard all of those at some point where a problem to why this VR6 wouldn't start for other VR6 corrado's at some point. Well i hope that handful can help everyone out :agrue::multi::drinking::pukeright: ---------- Post added at 2:16 AM ---------- Previous post was at 2:14 AM ---------- Thanks MAte i appreciate the thought but the Battery was replaced and it was new hopefully it's not a CPS or something

Thanks Mate, Yeah he did jump start it from the Battery but you do have a good point though if he's Bsing me on one thing it's more than likely that he's Bsing me on others as well. Im taking a shot in the dark on this one. Although im holding off for now He also said that the Fan Relays were Bad but that hasn't been fixed either. Where is this Blue Exciter wire and what does it do? ---------- Post added at 2:34 AM ---------- Previous post was at 2:32 AM ---------- Im from the USA so Halfords might be a long shot for me but thanks for the invite i should give them a call:dance:

Hey Mates, So there's this Corrado i went to look at that i wanted to buy and the guy told me on the phone that there's nothing wrong with the car so when i get there the car wont start and he tells me Gee it's never done this before I knew the Guy was BS"ing me but i just let it go. Any how he says its not the Battery or the starter or the Alternator What could it be? The car only starts with Jumper cables on it and after you drive it around for 5 minutes and then turn it off it wont start again. What is the problem why wont it start? Any Ideas? :bonk::(:argue:

Thanks for looking out mate but i almost wet myself when i saw the F-430 Ferrari group buy come on now is my Headlight conversion really to much for you guys to handle? Im not looking to change the Body style of this Corrado at all just the front end and Bonnet. ---------- Post added at 3:38 AM ---------- Previous post was at 3:34 AM ---------- Those Eye lashes aqre rerally Gay looking i would never put Eye Lashes on a car lets get real now lol! Personally this upgrade with the Headlight conversion isnt really that bad of a Swap you guys are making it look like im changing the whol car im not the contour lines of the car are going to stay the same i wouldn't change that at all!

I like that pic that you put together it looks good! Can i see the front of it? How long did it take to do that is that for real? ---------- Post added at 5:02 PM ---------- Previous post was at 5:01 PM ---------- Please dont insult me lol thats a girls car that look that im going for aren't girly at all so just turn the page already lol!

Thanks for your thoughts mate but check out this Corrado Concept design and maybe you'll give it 2nd thought. I really don't think it looks bad at all especially the Blue Corrado concept and yellow one. The Blue one is my favorite and that's the style of Headlights that id like to go with and its not a curvy body style at all its a rather stealth approach indeed id say! Its time for a face lift! :cheers: ---------- Post added at 2:48 AM ---------- Previous post was at 2:44 AM ---------- I see your thoughts so here's my favorite one that i don't think is that bad at all and the body lines aren't to curvy check out these pics below i really don't think its that bad. These are the exact type of headlights that id use if anything it gives it a new glow and a bit of a more aggressive look to it. ---------- Post added at 2:58 AM ---------- Previous post was at 2:48 AM ---------- Sorry you think that but i don't think so mate take a look at these pics because these are a direct approach of what the headlights would look like

Hey there everyone , Ive been contemplating this idea for a while now and i hope that one day i can make it work. Is it possible to totally remove and replace the Stock fenders front Bumper and Bonnet to fit in a pair of custom headlights custom fenders and custom bonnet from a 2012 Porsche Panamera because that's the kind of look im going for because personally i think the stock Corrado headlights are really ugly with that Rectangular shaped headlight and rectangular shaped fog lights in the bumper as well are really Ugly and the Corrado has desperately needed a face lift for years now she's crying for a makeover! Have a look here i posted some pics of the Porsche 2012 Panamera. Let me know your thoughts!

Good deal man perhaps if i ever see the next Corrado blimp i can fly over there and see all these great Corrado's that you guys have until then ill build the dream here and tell everyone about it but that's quite a bit from now. Im building it so i guess that's what counts! ---------- Post added at 6:27 AM ---------- Previous post was at 6:24 AM ---------- Absolutely sport much regards to you guys over here. It's been uplifting the support weave had here to achieve the goals of things! :smug:

That Bloody Cat women did it again! I hope they catch this Cat Women of yours that hit your car so that Justice will be served and get this Gem back to its Essence again!

Im from suffolk County New York USA. How about yourself where are you from?

That sounds like alot of electrical work . Yeah there used to be a site called Corrado club of America but ever since the Founder died and passed away the Moderators of the site just couldn't keep up with it any more and it closed down that was over 7 years ago.. Thanks for telling me about Corrado club of Canada and VW vortex ive herd of them but the chaps over there aren't as great as you guys are over here. I like the atmosphere of people over here better and the theres better idea's and Mods that are going on over here to. I havn't bought a G60 yet right now im just planning everything i did Mention the G-60 only because there's one for sale in my Are for 1k in puke Bumble Bee yellow the Ugliest color ever lol! Well anyhow thanks for your help man.

Im Live in the USA and i live in the Suffolk county Long Island Ny area . How about you? Why where you wondering? ---------- Post added at 5:43 AM ---------- Previous post was at 5:40 AM ---------- Thanks Sport that helps me out alot. Ill read into that.:dance:

Thanks alot man i really appreciate it. When you say R32 your talking about the VW engine right? when you say 02m what are you talking about the Audi transmission? So i would need to modify and install a VR6 subframe too? Do i need that so that the V6 Audi TT engine will fit? Wide track sounds like a Gem indeed chap! So basically are you saying that i can use the R32 ECU for The Audi TT Engine also? Or can you only use the R32 Ecu for the R32 engine? :shrug: I dont know what the Loom is. Im not familur with the Immobilser and i don't know what Stealth or Swict is either i guess there a tuning company that works on Electronics . Well ok thanks for your support man ill look into these parts . Right now im just making a plan for all of the things i need im not actually starting it just yet . Ill check those other threads out that you talked about . Thanks man!

Hello everyone im looking to do an engine swap from a Corrado G60 and swap in a 2006 Audi tt 3.2 Ltr Vr6 Engine. Do you know what parts i would need to do it? Do i need the Audi TT 6 speed manual tranny to ? Also do i need to swap out the ECU that's the Electronic control unit or can i just put in a Jumper ECU to make the change? Also do i need custom Axles? I think i probablly would if so where can i get custom axles made? Please help thanks :scratch: