iamsilverfox
-
Content Count
207 -
Joined
Posts posted by iamsilverfox
-
-
Yes it is, but it's been sat in my shed for a while!
-
after getting these shipped from america, i no longer want them. they are the long shape ones that go in the side of the bumper. very rare over here in the uk.
after £100 posted. will whip a picture up tomorrow.
-
bump with promise of pictures tomorrow!
-
No probs mate - you got any pics?? I didn't realise you could get non-gen ones - sure it's for a Corrado?i'll grab some tomorrow. and yeah i think? ha.
-
if anyones interested, got it all sorted in the end for ultimate dubs. lowest static vr around!
[ATTACH=CONFIG]73405[/ATTACH]
[ATTACH=CONFIG]73406[/ATTACH]
-
Hi mate, I'll take the window reg please!slight issue with this! just dug it out, and it turns my memory isnt what it was. Turns out its not genuine im afraid. But still new. You're welcome to make a lower offer if you're still interested. Terribly sorry!
-
Id like one of these. Is it still possible?
-
Does the door handle have to micro switch for the central locking ? If so I'll take it.yeah, it comes with the bit of loom and plug.
-
Pair of early headlight glasses. Really good condition - £70
Brand new drivers window reg and motor. - £60
Brand new oem drivers door handle and lock with two matching oem cut keys. - £50
Full g60 cloth interior with cards, good condition, bolsters good, from low mileage car - £200
1.8 kr full engine with ancils and box. from 128k mileage car, (my old car), recent cambelt, well maintained by myself (vw technician) all with oem parts - £150
Pair of early headlights, good condition - £50
Various early interior trim -ask if you need something
oem g60 injector loom, good condition - £30
I need the fuse box cover trim and a pair or late foglights with loom so could part ex against anything here :)
all items based in redditch, uk.
-
Yes i can.Pm Emmett with some payment details and ill send some dollar. assuming all vr exhausts are the same? Mines a late vr
-
do a deal on the air drill and 1/4 torx bits?
-
would you take £80 posted for decat and grill?
-
Ive just fitted one of these last week to my vr.. It was a bit of a pain tbh. where are you mounting it? With my kit the threaded bar was quite short and i had to lock tight it in place with enough thread sticking out to be able to tighten it all up. the threaded bar on mine wasn't long enough to wind right to the bottom on the car and still have enough length to go through the sandwich plate and into the block. As for the old coolent pipes i just used a piece of hose and linked the two outlets replacing the old hoses.dont know where im mounting it yet. havnt got a huge amount of length to play with
the threaded bar in my kit almost seems slightly too long. in regards to the hoses, i've purchased a crank pipe without the nipple and replaced the heater core plug on the other end for a blank.
-
****, i completely forgot about this! im very sorry, having a bit of a rough time at the moment. £100 collected?
-
Is this for the VR?yes it is
It would appear you have a kit that retains the OE heat exchanger. You need the kit with a shorter centre tube that bypasses the HE.i bought the kit off ebay. he said it apparently replaces the stock exchanger.
-
Got myself a mocal oil cooler. Few questions on fitting.
- how are people blanking the too rubber pipes off?
- how are people routing the send/return pipes to the radiator, there doesnt seem to be much room for anything.
- with the entended bolt the right way round (holes towards the cap), it seems to go quite tight and the sandwich plate is still kinda loose. Do i judst keep tightening or am i missing a washer or something?
thanks!
-
unable to get pictures, for a few personal reasons, sorry guys.
yeah iirc it was a refurbed rack. i bought it off boost monkey off here and never fitted it. I dont have pictures but i did find the previous build thread. http://the-corrado.net/showthread.php?37418-Project-Plum-The-Plan-of-Attack/page33&highlight=project+plum its full of pictures of the subframe, and pictures of its refurbishment etc.
-
had no idea these were worth this much
-
I promise i'll get pictures tomorrow, been really busy sorry.
my error on the rack, its the track rod boot that had split. its a complete genuine replacement, not fitted though. and due to it being in storage the pas rack boots have both perished. but these arent expensive to replace.
-
I'll get some pics as soon as I can. Away from a pc atm. I bought the frame already refurbished off a member off here. I'll try and find his build thread. I believe all the parts he used were genuine. On storage the os ball joint boot was torn, but I bought a genuine replacement today.
-
-
-
got some lupo arms. can supply with new oe blades too if you want. arms £40 posted.
-
i've got one you can have in black. good condition. £40, but im afraid im based in the midlands. postcode b98
fulyl refurbished 16v front subframe with new wishbones, rack pas lines etc
in Parts for Sale
Posted
Quicker to text me bro. 079207 42987