swillslet

Hello Chaps! Have recently got my Corrado through its MOT. Have replaced the rotor arm, fuel filter, dizzy cap and rocker cover gasket. After driving for a few mins the car suddenly drops in power. I can put my foot to the floor and it takes forever to get through the rev range. When Im in 3rd going about 30mph it feels like is choking. I think it may well be a fueling issue but not 100% also idles irregularly but this is intermittent. Any ideas on how best to tackle this? Cheers

Hi all! I started my 2.0 16v (l reg) today and noticed upon pulling away that it seemed to lack a lot of 'oomf' also was idling all over the place. I took a quick look at the engine bay and noticed that the engine was moving a lot more than i had previously seen. Kinda like it was vibrating. I know that it will move slightly but nowhere near this much, the dipstick was moving backward and forwards about an inch. I then turned the engine off then back on. Upon doing this it idled fine and the engine movement was gone. Im pretty stumped... Any help given will be greatly appreciated.

Hi chaps, first post on here so you will have to bare with me. I have a 2.0 16v and when i started it up this morning discovered oil trickling out of what i guess is the oil filter coupling/housing (?). Any help in what i will need to do to get it off, check for faults etc will be very appreciated.

Hi chaps, first post on here so you will have to bare with me. I have a 2.0 16v and when i started it up this morning discovered oil trickling out of what i guess is the oil filter coupling/housing (?). Any help in what i will need to do to get it off, check for faults etc will be very appreciated.