D-13

can you pm me some pictures?

Yes still looking buddy

Can you pm me some details buddy and will get straight on it Rich

Anyone got a smoothed front bumper? Looking for a early one with the reg plate deleted? Or one with everything deleted A late bonnet in black Late clocks preferred if they are broken and cheap as only need the needles from them

Are the tb and dials still available???

I'd be keen for this if you could pm some details?! Cheers

Cool, I will take them....if you can pm me your details buddy

Can you post the wing mirrors?

Cheers buddy

update...... Got the rado mot'd!!! so its back on the road just a few minor issues......coolant leak (cracked thermostat housing) a perished rubber not major, heater blower not running at any speed, and oh no speedo!!! So Stage one is complete i have a working corrado that can be used for weekends and going to shows....... Stage two is now in full effect..........Shopping list 1) full heated seat set up..........Complete ready for install 2) Full OEM headlight washer set up.............Most parts here others on order 3) Full headlight leveller set up..........complete, ready for install 4) full OEM cruise control........Complete but requires alterations for RHD car (parts ordered) 5) Full air ride set up.......set up complete but requires installation and boot build 6) Full digital dash conversion..........Astra gte clocks are modded to fit the dash, loom converted, requires a oil pressure sender (ordered) and testing 7) Oem Us spec passive seat belt set up.........complete ready for install 8) Us spec 3rd brake light..........complete unit but require fab work on boot to fit etc Stage 3 with be to rebuild my 1.9 jabba built g60 engine and swap them over with adding the jabba sport charger cooler and custom SS exhaust system Stage 4..........Respray???? change of colour i think.......

Still for sale????

also sorted out all the lights.....but some where just bulbs passanger elctric window was siezed solid but freed off air ducts and indicator sorted out New G60 badges fitted New window seals fitted........ then this happened time to bin the old sunroof and replace it with a passat moonroof and a cleaner headliner.......

so final got some spare time.......so went to work on the corrado and found this! WASNT happy at all.........Must have been ghosts? Anyway spured me on to get the rado in to the body shop for some work............ before......... to this........... BYE BYE dentski!!! now i can start to get to grip with fitting new parts etc First up out with old in with new............ Had to put these tails on due to the car coming with after market lights fitted so the wiring had be alter with aftermarket bulb holders......very please with them what makes its better they were a eBay bargain!! Next up ditched the w@nky schuttle plastic and got me a SWG single piece, whilst fitting gave the schuttle panel area a good clean out Once clean time to fitted the SWG panel...........and so lupo GTI wipers The panel will need spraying at some point

Still for sale?

Cheers buddy, yes your right on the interior......it was featured in pvw years ago, it was a car I always loved purely because of that interior (even still got the copy of the magazine!!) couldn't believe it when I got offered them Sadly I have had a change of heart with this interior, it's not bound for the rado.......but I have sourced a full grey leather interior instead

so a bit of a update................ finally stripped of all In-pro crystal stuff and replaced it with a Spoonfed G60 debadged grill, Cult society g60 intakes and a set of US indicators........still not sure if i like it?? maybe it just needs a dam good clean???? The really crap part is them In-pro parts use different bulb holders so i am having to find the OEM items to change it all back The rear was treated too again with a Spoonfed item Also pick up a full ss exhaust system and few other bits

excellent let me know if you have buddy

Anyone breaking a earlier corrado? I need........ Passenger electric window reg/motor Rear license plinth Oem front indicator looms/bulb holders Rear light bulb holders (as I have removed the after market lights and going back to original hence why I need the holders) Sunroof seal or a passat b4 moon roof would be better

I have managed to get hold of replica vwms sport shifter, it was made by Ringspann and is a direct copy of the vwms one I don't have a the cables, I have a company that can make the cables but require the length of them I have spoken to someone who has one fitted to a mk1 golf but I know the cable length will be shorter than I require as I am wanting to fit the shifter in to my 92 corrado g60 Can anyone help with the length of cables I need??? Rich

There is quite a few other cars in there too mostly early water cooled vw, so my rado is quite modern

Haha know what you mean as you should hate it but you can't help but love it , it is a mates car running a tdi conversion and gets a lot of attention (sometimes not by the right people) The silver one is a 20vt owned by the same chap.....all I can say is watch this space on that one

new interior collected

If thats the case there is only 3 sets left because i got a set the other week....

Got a bit of spare time so I thought I would start up a thread............... Years ago, a had a awesome G60 in red, loved it but i had a company car and it never got used, then lost where it was stored so finally i sold it for stupid money to my cousin who was going to work in germany after making him promise to look after it.........Well he never and last i heard it was rotting in a old converted pub car parking in germany.....needless to say it was my 'NEVER SHOULD HAVE SOLD IT' car......... But time moves on, and whilst looking for parts for my wifes mk1 cabrio my friend said 'i have something that may interest you'.....so i popped over and bought this http://i1230.photobucket.com/albums/ee498/busterdub13/A605A907-948D-4092-A45A-64899A928A60_zpsfip1pdmr.jpg to be honest i bought it as soon as i seen it....so missed have a g60 to play with http://i1230.photobucket.com/albums/ee498/busterdub13/685D873E-35D3-41A8-88F1-E9772C816485_zps9s9witbn.jpg so it is now at my unit Already, the parts are starting to be ordered......