zyndol
-
Content Count
28 -
Joined
Everything posted by zyndol
-
Not leather. Cards with pods. Got them on ebay now
-
Rear seats complete. All door cards including intact speakers and covers. An interest.
-
How do you guys deal with the wheelspin. I cant put power down in 1st or second. Ive jacked rthe suspension so the car leans onto the front wheels. Got wide 16" wheels with good tyres. Soon as the turbo is in spin wet or dry.
-
Hi do you have a decent condition d/s front wing and a bonnet?
-
snapped 2 solid front mount bolts and engine hit the top of the bonnet twice so now i use the standard rubber mount. Seems ok at the moment.
-
I will have the splitter from you if you are confident that it can be packaged so it doesn't break through the post.
-
Turns out it's not the speed sensor as I have located that plug and it is plugged in. It looks very simalair in shape to the speed sensor plug but it is about 2 thirds the size of it. Any ideas?
-
As above what is the condition
-
[ATTACH=CONFIG]77381[/ATTACH]
-
[ATTACH=CONFIG]77380[/ATTACH]
-
On another subject. I finally managed to fit an air box and remove the crap cone filter that was on it. Its a 4motion air box with 80mm Maf hole. Box smoothed on inside 80mm hole in bottom for 80mm intake to front of car and Piper Ross oilless filter. What a bitch to fit. Kept messing with gear linkage and linking intercooler pipes. Running very well and seems to have smoothed boost issues.
-
Cheers for replys. It is on normal corrado clocks. Is there a plug socket coming from the ecu to be plugged into or is it more complicated than that? Ecu is original but is in the cabin above the dashboard.
-
Wire runs down the right hand side of the engine when you are stood in front of it.[ATTACH=CONFIG]77370[/ATTACH]
-
Cheers for quick reply. Here is pic again of other plug. reply[ATTACH=CONFIG]77366[/ATTACH]
-
[ATTACH=CONFIG]77363[/ATTACH] other pic of plug
-
[ATTACH=CONFIG]77362[/ATTACH] Anyone able to tell me what this random unpluged plug is for? Also on the other picture a three way pipe that goes to the radiator has a plug socket on it, any ideas what this is for? Some sort of temp sensor? The plug doesn't fit the socket before it's said. Engine is an AGU. Car runs absolutly fine so can't be to vital, but making it run better would be great. Cheers For any help.
-
Sounds like some kind of limp mode, I'm no expert.
-
Had a funny issue recently while trying to maximise my boost. I have read about this on other forums but no real answers. Basicly when the car boosts in 3rd 4th and 5th it holds bost around 15psi with no drop right through the revs. In 1st and 2nd the boost shoots up to 15psi but drops off very quickly half way through the revs. I'm guessing its not a leak as it holds in other gears.
-
I would check for kinks or badly fitted silicone boost pipes. Re routed mine recently and its like a new car.
-
Hi all I have a corrado with escort rs seats in the front and one of the frames is badly damaged. Question is, what type of frame will be on the seat? standard escort or will it be doctored? cheers Tom
-
Figured it . Front engine mount snapped. Engine hitting the bonnet pinning the throttle open and denting bonnet.
-
Hi issues with my raddo. One the accelerator pedal keeps getting stuck down after hard boost continuing the car accelerating. It doesn't do it when it is stationary on full revs only when it boosts fully moving. You can get you foot under the pedal And pull it back up.
-
Hi two issues with my raddo. One the accelerator pedal keeps getting stuck down after hard boost continuing the car accelerating. It doesn't do it when it is stationary on full revs only when it boosts fully moving. You can get you foot under the pedal And pull it back up. Secondly any idea what this plug is for? Not su re if it was ever attached.
-
I'm sure this has probably been covered in here before and I don't want to get into a massive debate to whether cone filters increase / decrease or get heat soak e.t.c. All I'm interested about is - Are there any air filters out there for the 1.8t 20v that have proven power gains, or any that anyone has used and got a good result? I'm running a AGU engine and currently it just has a cheaper open cone filter on it but it needs replacing. Cheers Tom
-
I'm just talking about in the speaker section of the door pocket isolating it from the rest of the door so that the foam ends where the door card ends.