danielmjpyle
-
Content Count
21 -
Joined
Everything posted by danielmjpyle
-
Just ordered one thanks! Ok ill get in and have a better look at the wireing on the lambda sansor...looked like at least one of the wires was broken and exposed. Just ordered a new throttle position sensor while im at it too... Thanks
-
Also while removing the hoses i looked down the back of the block and noticed a sensor with a few wires attached on the exhaust manifold..some of these wires look a bit suspect..could this be a cause?
-
Yupp checked the hoses, cant see anything...whats the black box that has three hoses coming in/out located next to the ISV?
-
I have two small plugs under the gear stick surround
-
I have replaced all three sensors already. Yes worth a check with vagcom. Aparantly i need an adapter plug for the rado as its a different plug. Is there somewhere online i can order it from/does it have a specific name? Cheers
-
Thanks guys for your replies Ive fitted a new ISV. When you say the sensor that goes to the ecu do you mean the one on the side of the throttle body? Thanks
-
Anyone any idea whats causing this? thanks
-
Hi, the sincro on my VR6corrado box is shot. i have been offered a golfVR6 box. are they the same? if not what difference would it make? Cheers
-
Gents, problem on startup. when i start the idle is up and down and eventually stalls. i have to rev it for a little while then it seems to sort itself out. What is causing this? thanks.
-
as near to £150 as i can get ---------- Post added at 7:36 PM ---------- Previous post was at 7:36 PM ---------- sorry not willing to split ---------- Post added at 7:39 PM ---------- Previous post was at 7:36 PM ---------- I bought them from a fella on here for my mk2 golf vr6 but sold it and bought a corrado. hence i dont need them anymore. not sure as to the mileage.
-
They are corrado vr6 original vw parts.
-
Paid £150 for them inc postage.dont need it now.
-
Ok thanks i assumed thatd be the case.I can get hold of a mk3 golf vr6 gearbox in good nick is it the exact same as the corrado one?
-
I know this is quite a common problem. Is it something that is sortable with just a change of gearbox oil or is it going to involve a lot more? Cheers
-
Ive just bought my first Corrado (VR6). the standard exhaust needs replacing. can anyone recommend a good quality stainless manifold back system which isnt too loud? Cheers
-
Cheers your a star!
-
Gents, Im about to buy my first corrado that is a vr6 on 87k. can you tell me when its recommended to change the chain and pullies? also while having this work carried out is there anything else that would be a good idea having done? Thanks..
-
Details details
-
With the wires (i think there shud be 4?) so i can fit it to my loom. Ta
-
Hi, i am after a vr6 diognostic plug ( the large one not the two small ones) Thanks, Dan
-
Hi, i am after a vr6 radiator and fan assembly etc in good condition. Cheers Dan