VR-OOM

Nice one, thanks [emoji106]

About to strip the old foam out and put in the new, before I start does anyone have any recommendations on how to clean up the surfaces and remove the old glue? Cheers J.

A past Corrado owner has kindly given me his collection of magazines and the majority have Corrado articles in them, I'm keeping a few but thought I'd list the registration numbers of the cars featured below incase anyones car is among them. If it is and you want the magazine then drop me a PM and I'll post it on. Cheers James G80 TYO - October 1991 - BRMotorsport Ad G330 VHM - October 1990 - Scotts Ad G662 KBD - November 1990 - Article H927 GNK - July 1991 Picture in GTI International Article G322 TYM - March 1990 - Cover Car & Article G322 TYM - January 1991 - Scotts Oettinger Article H336 EUD - May 1991 - Audio Install Article H226 XVV - August 1991 - Article F241 BVV - November 1989 - Cover Car & Article M906 NRD - August 1995 - Cover Car & Article L660 GHV - November 1993 - Small Cover Image & Nothelle Article H957 DBD - July 1991 - Cover Car & Article (inside the reg is H959 DBD) H399 OEP - January 1991 - Cover Car & Article J151 XVV - May 2000 - Cover Car Image Only F241 BVV - July 1989 - Cover Car & Article F241 BVV - May 2000 - Article Car K854 WVV - September 1993 - Cover Car - Tyre Test Article K608 XRP - March 1993 - Article K25 EUC - January 1993 - Cover Car & Article

My fans ran on even with the engine off, I had to disconnect the fans to stop the battery from going flat. I changed all the temp sensors inc the rad to no effect, in the end it turned out to be the fan control module.

Mine also arrived on Saturday, very happy [emoji106][emoji106]

Hi, can you confirm you still have the late style in stock and how I can make an order? Cheers James

I've got 4 pot Brembos, I have a set of Leon discs which I thought were for a cupra but the offset is wrong.

Looking for 323 x28mm Corrado offset brake disc, recommendations gladly received.

At last got around to starting to fit the trim, bonded two front clips to the new trim [emoji106] will let them cure then the other end.

Went to look at these today but unfortunately even with spacers they wont fit over my Brembo calipers, if you run standard breaks then they'll fit fine BBS RK 504 5x100 ET35 7.5Jx17. BBS valve caps and valves. 185/35/17 Nankang Ns2s, (these wheels will take 205/40/17) only used for a couple thousand miles. Re painted last year professionally and bolts refurbished too. £650 ONO. If you're interested call Joe on 07748 700341 and tell him James told you about them.

I'm 50 and had my VR for 20 years [emoji3]bought her in 1997 [emoji106]

Sorry Bob, looks like you've been undersold by VAG-hag. Thanks James

Sounds good to me VAG-hag, let me know how you want payment. Cheers James

As the title says, looking for the lower inlet manifold for a VR. Cheers James

Lovely, how much posted [emoji106]

Hi mate that's cool, just want to check and this is hard to describe that they do have the inner plastic bits in the screw recess' as they're the bits that break when the screws are tightened? Cheers James

Will do [emoji106]

Looking for unbroken rear seat belt trim/covers, the ones that the seat belt goes up through before the pillar anchor. Cheers James

Guys, thanks for all the replies, having weighed up the practicalities etc I've decided not to purchase the car but I've asked the owner to keep me informed of what happens to the car and if it goes to a breakers I'll get the details and keep you all informed. Cheers James

Hi Guys, some advice and your thoughts please. I came across an N plate VR6 this morrning that had sideswipped a central barrier and I have been offered it for reapir or breaking. In my opinion its not going to be cost effective to reapair as the rear quarters damaged so was wondering whats its value as a breaker? A few details about the car, its a 94/96 N palte VR6 with 70k on the clock, colour dark metallic green (can never remember whether its Classic or Dragon), has a full black leather interior and the guy's looking for around £1,500. Quite frankly if I'm going to have the car sat for months then I can't be arsed but if I can shift a good part of the car quickly and recoup my costs then I'm tempeted. Advice and your thoughts Welcome. Cheers James

Wow, lovely [emoji106]

End Clips received with thanks :-)

Order and payment sent for end clips made :-)

Sweet will get my order in on my return [emoji106]

Does anyone have any recommendations where to best place is to get hub centric spacers from? Cheers