oxfordpaul 0 Posted February 7, 2005 Hi, I want to clean my engine bay and scuttle area in particular. Problem is, can't remove the plastic trim along the bottom of windscreen. It's in 3 bits but feels like i'm gonna break it if i pull too hard - i think it's just clipped in. Ha anyone else done this successfully? Quote Share this post Link to post Share on other sites
Supercharged 2 Posted February 7, 2005 errr... they come attached to new glass so i'd say you can't really remove them and put them back on... Quote Share this post Link to post Share on other sites
Andy T 0 Posted March 5, 2009 Had two windscreens fitted, neither came with new lower trims, the originals were put back on. They are normally held on by clips, but sounds like some are bonded back on after a windscreen change, making them difficult to remove without breaking. Quote Share this post Link to post Share on other sites
Neil VR6 0 Posted March 5, 2009 My windscreen is a replacement and the fitter used what I presume to be the strongest glue the world has ever known. Quote Share this post Link to post Share on other sites
leon263 0 Posted March 6, 2009 From memory I think there should be a couple of screws, one at either end and probably a shed load of bonding if mine is anything to go by. Quote Share this post Link to post Share on other sites