fast x 0 Posted February 15, 2005 Hi guys has anyone got any pics of how to remove the 3 plastic engine covers from the vr any help will be most apresiated. thanks. Quote Share this post Link to post Share on other sites
andy 0 Posted February 15, 2005 If you're talking about the black plastic ht lead guides....no pics but....remove the leads then there are several allen bolts holding the guides on. The VR6 grey cover is held in by those guides and will just lift away when they're gone. Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted February 15, 2005 they arent allen bolts they are torx head bolts if you want to take the silver vr6 cover off then undo the rear black plastic , 2 bolts, then underneath are 2 more bolts that hold the center vr6 section in, remove these and it lifts out Quote Share this post Link to post Share on other sites
GIXXERUK 0 Posted February 15, 2005 ps. the bolts are obvious Quote Share this post Link to post Share on other sites
fast x 0 Posted February 15, 2005 ok guys thanks a lot for the info..... Quote Share this post Link to post Share on other sites
