Jump to content
Sign in to follow this  
Rollyrob

Late model Indicator stalks can they be fitted to a 1991 G60

Recommended Posts

Was wondering if anyone knew if the later modle C's indicator and wiper stalks would fit on my 1991 G60.

 

Also does anyone know where i can get hold of some late type speedo pins the orange type

Share this post


Link to post
Share on other sites
Guest

Woody has fitted the later stalks, might be worth dropping him a pm, think he had to change the hazard light switch too

Share this post


Link to post
Share on other sites

Yeah.. in short its a simply swap over, plug and play jobbie :)

 

As Andy says, you do need the later hazard light switch too cause its a lot bigger :)

Share this post


Link to post
Share on other sites

Ive got late spec ones on my '90 Valver, I didnt change them but from what i can see you need to change the hazard button as andy665 says. Ive also got the cruse control buttons but i dont know if that came with all late spec cars.

Share this post


Link to post
Share on other sites

I actually just did it yesterday! You need the plastic surround from the later stalks and the hazzard light (its a part of the later stalks) as well. Everything just swaps right over same plugs and everything. Super easy swap if you could get a hold of a set.

 

I will post some pictures up this weekend of them and my new roll cage after its installed. =]

Share this post


Link to post
Share on other sites
I think Bally has them on his too.

 

Yeap I do.. & with the early hazard switch :wink:

Share this post


Link to post
Share on other sites
You don't need to fit the later surround when you fit the late stalks to an early car.

 

I know you at least need the top piece because the hazard light is much larger on the late stalks. I know the part number differs on the bottom cover on the late stalks from the early ones. I just used the late top and bottom piece and the late stalks. Everything worked out fine.

Share this post


Link to post
Share on other sites

on the other question, the needles do indeed just swap over too, but I've yet to find anywhere which sells just the needles, so you'll probably end up having to butcher a set of late clocks to get the needles... Dunno if any other VWs used similar needles that could be used though... probably worth checking your local scrap yard for anything similar... 8)

Share this post


Link to post
Share on other sites
Guest

click the link below and have alook at picys.. Did i kinda how to

Share this post


Link to post
Share on other sites

The later stalks i have came out of a golf. The only difference with these are that the MFA cable is not as long and it required me to splice into and then heatshrink up the old cable (only four cables colour to colour). I had to buy the surround from Mr Steeler which comes in three parts. 1 hour job to do the whole thing. Golf bits should be easier to get then C bits.

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Sign in to follow this  

×
×
  • Create New...