Worrying Vag-Com fault codes ABS related Help!

[Jay_vr6 0]

Just got Vag com and run the complete test and it's thrown up these 2 errors

 

00287 ABS wheel speed sensor Rear right (G44) 35-00 --

00290 ABS wheel speed sensor rear left (g46) 16-00 - signal outside specifications

 

The car is a 94 VR6 and was idling at the time

 

What is my course of action ?

[Ice White Socks 0]

Assuming that your ABS light still has the bulb in it and goes off after you start the ignition then I don't think you have a problem- because whatever faults the car may have had on the back ABS sensors must have been fixed- just the codes not cleared out.

 

I believe if you have your car rolling roaded then it will also log faults on the back wheel sensors too..

 

Cheers

 

Mike

[Jay_vr6 0]

ahh yes the ABS light does indeed flash a few times when i start up, is there a way on vag-com to remove all the old codes ?

[Ice White Socks 0]

Yes there is an option to clear out all the codes. If you lookon autoscan and there is an option to clear all 'DTC's- I'm pretty sure thats the right one but check the vag-com manual just to be sure though..

 

Cheers

[RW1 0]

ABS light on start up for 1 to 2 seconds is normal.

 

Has the Corrado been on a rolling road at any time? If so, because the rear wheels are stationary, these sorts of faults get generated.

[Henny 0]

handbrake turns also make these error codes crop up... :twisted: :lol:

[2cc 0]

:shock:

[Jay_vr6 0]

it'll be the fault codes from where a tosser tried to kill me and the rear passenger wheel ended up disintegrated on a curb, cheers gentlemen :)