billinjah 0 Posted June 16, 2005 how do i do this? to m,ake sure they come on at the same time take it to an mot station? Quote Share this post Link to post Share on other sites
Roger Blassberg 0 Posted June 17, 2005 1. Disconnect handbrake cables at calipers. 2. adjust caliper pistons to give 1mm clearance to pad backplates. 3. reconnect handbrake cables and adjust them at lever end (if necessary) to ensure that actuator is just resting on the end stop at the caliper end when the lever is fully in the released (down) position. 4. depress footbrake a few dozen times. and Bob's your uncle (or father in my particular case.) Best wishes RB Quote Share this post Link to post Share on other sites
