g60rado 0 Posted July 15, 2003 If i get a car alarm for my g60, will I need different actuators for the door locks to work with the keyless entry part, or will the factory ones work? anyone had any experience with this? Any tips will be greatly appreciated! Quote Share this post Link to post Share on other sites
Rams 0 Posted July 16, 2003 It very much depends on the alarm. Most alarms these days have the option of wiring them to the central locking, if not there is a kit you can by in addition to the alarm that will make your car keyless. Micrscan do the system, however, just ask your fitter which alarm would wire up to my central locking. Obviously, your car has central locking. I wasnt sure as it is an American spec. Even if its not central locking, you can buy the mech to work it and to wire it up to the keyless entry. Hope that helps Quote Share this post Link to post Share on other sites
g60rado 0 Posted July 16, 2003 I was hoping to install it myself, which looks more difficult the more i think about it :roll: Quote Share this post Link to post Share on other sites
Rams 0 Posted July 16, 2003 If you get the alarm that has these features then they will come with instructions. Justy check out the insurance side of things with the alarm as this could affect the rating i.e. cat one cat 2 etc. It shouldnt be that hard, but be prepared for wires comming out of your ears mate. Never be defeatest!!!!! If you have a mate that can help you who know electrics, then it can be quite amusing as you can annoy him by saying, so where does this go, and why is that like this!! Quote Share this post Link to post Share on other sites
G60 0 Posted July 16, 2003 lol rams. that sounds like me :lol: Quote Share this post Link to post Share on other sites
