jenks 0 Posted July 20, 2005 Tried using the search, but cant find any info :mad: Anyway mine looks like it needs doing so how much are they? take it there not too bad? But main thing is how hard? :? Its on a L reg Vr6 Quote Share this post Link to post Share on other sites
Supercharged 2 Posted July 21, 2005 They are about £10 from VAG, not too difficult to change but you obviously need to remove the inlet manifold(s) and you'll need some spline keys/sockets to remove the cable management guides... Use a slight amount of oil on the gasket when you swap them over and make sure it's seated correctly (it doesn't help the fact that they come all twisted up in a bag!) Do up the bolts loosly from the outside towards the midle from opposite sides (hope that makes sense) and I think the torque setting is 11Nm (can someone confirm this?) Quote Share this post Link to post Share on other sites
Kevin Bacon 5 Posted July 21, 2005 Almost, but I'd refine the advice by suggesting you fit the gasket dry and torque them to 11 lb/ft. 11nm is just about finger tight! Quote Share this post Link to post Share on other sites
