Full beam stopped working

[Taggart 0]

I recently replaced the full beam indicator LED and the full beam appears to have stopped working (although the LED now comes on). When I flick the stalk the headlights go out and the sidelights go on.

 

I have an uprated loom (not sure if it's Gavs), and the full beam worked perfectly well before I took my dash apart. Any ideas?

[cheesy 0]

At a guess the fuse has blown on the loom or the relay has died

 

chris

[Taggart 0]

But it worked perfectly well before I replaced the broken LED.

[Taggart 0]

The plot thickens, it's only the drivers side sidelight that comes on.

[h100vw 0]

Mine look like this .....

[Kevin Bacon 5]

And what a fine peice of automotive engineering it is too :lol:

 

I lost my beams too once and it turned out to be the exposed inline fuses that were crudded up. Wrap them in tape is my advice.

[h100vw 0]

OT

 

 

There will be a number of these fine items available on Sunday at e38. Get them while they are hot. :mrgreen:

 

Gavin

[Taggart 0]

They look pretty much like that Gav.

[h100vw 0]

PM sent with my number.

 

The only light on the front that works is a sidelight? Very strange.

 

 

To start, prior to calling me if possible, I would check all the lighting fuses, in the fusebox and the loom. Swap the 2 relays in the loom around and see if anything changes.

 

Try reconnecting the std wirng back onto the drivers side headlight and test the lights. Also, you do have the ign switched on don't you.

 

Gavin